| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Throttle operation https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=14937 |
Page 1 of 1 |
| Author: | AlexJ [ Sun Jun 19, 2016 8:03 pm ] |
| Post subject: | Throttle operation |
When you disconnect the throttle cable at the carb, how does the linkage move on the carb? Does the linkage return to idle via spring tension when not connected to the throttle cable? If it does and it doesn't do it, is there a spring tension adjustment? |
|
| Author: | rpengr [ Sun Jun 19, 2016 10:54 pm ] |
| Post subject: | Re: Throttle operation |
All the carbs I've seen have a light spring returning them to idle if the throttle cable was disconnected. This functions to take up any slack in the connections, and also for safety to return to idle if the linkage came apart. No tension adjustment...If it doesn't work, the spring must be broken. |
|
| Author: | AlexJ [ Mon Jun 20, 2016 8:22 am ] |
| Post subject: | Re: Throttle operation |
I thought that was the case. No spring on the linkage. I'll get one and put it on to see how it works. Thanks |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|