www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Fri Mar 29, 2024 8:21 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 13 posts ] 
Author Message
PostPosted: Fri Aug 11, 2017 5:18 am 
Offline
Guppy

Joined: Wed Aug 02, 2017 7:54 am
Posts: 8
Hello guys.
I have a 1996 Horizon 200DLX, with a Volvo Penta 5.0FI(Ford) The Model number is 50FAPNCA. I need to get some ignition parts but I'm not positive on which engine model to use for part numbers.
One website I was looking at, had my model number listed in the engine selection list but no parts catalog for it. Ignition parts look the same as 50FIPNCACE but not sure. I will take the distributor apart tonight and look for part numbers. Just hoping someone could help me to figure out what model number to use.
The number I found,is on the intake. I couldn't find the stamp on the block. I will look more tonight for it.
Thank you all.

_________________
1996 Four Winns Horizon 200DLX
Engine VOLVO PENTA 5.O 50FAPNCA
Transom Volvo Cobra SX 3868388


Top
 Profile  
 
PostPosted: Fri Aug 11, 2017 1:46 pm 
Offline
email admin your custom rank

Joined: Thu May 27, 2010 9:10 am
Posts: 1488
May try this site....it shows to have ignition parts under the model number you posted

https://www.marineengine.com/parts/omc- ... l=50FAPNCA

_________________
http://i1339.photobucket.com/albums/o71 ... wqm355.jpg


08' H210SS
VP 5.7Gi


Top
 Profile  
 
PostPosted: Fri Aug 11, 2017 3:49 pm 
Offline
Guppy

Joined: Wed Aug 02, 2017 7:54 am
Posts: 8
Thank you, now I found water in the drive shaft bellows! Oh well, time to figure out all the parts I need.

_________________
1996 Four Winns Horizon 200DLX
Engine VOLVO PENTA 5.O 50FAPNCA
Transom Volvo Cobra SX 3868388


Top
 Profile  
 
PostPosted: Fri Aug 11, 2017 4:26 pm 
Offline
email admin your custom rank

Joined: Tue Jan 18, 2011 8:45 pm
Posts: 333
Your engine is a OMC
What parts are you looking for?


Top
 Profile  
 
PostPosted: Sat Aug 12, 2017 4:03 am 
Offline
email admin your custom rank

Joined: Thu May 18, 2006 6:01 pm
Posts: 216
Location: Ohio
Here is another source:

http://www.crowleymarine.com/johnson-ev ... 2050FAPNCA


Top
 Profile  
 
PostPosted: Sat Aug 12, 2017 6:16 am 
Offline
Shark

Joined: Tue May 06, 2014 7:25 am
Posts: 145
Location: Ohio
Which ignition parts are you looking for? Most of the ignition parts on the OMC/FORD engines are standard Motorcraft parts.

_________________
2008 H200 Frenzy Edition 5.0 GXi

1993 Horizon 190 5.0 EFI (Sold)


Top
 Profile  
 
PostPosted: Sat Aug 12, 2017 8:43 am 
Offline
Guppy

Joined: Wed Aug 02, 2017 7:54 am
Posts: 8
Thanks all.
I was looking cap, rotor, plugs and wires.
All should be standard Ford parts.
BUT now I need to replace my u-joints and bellows.

_________________
1996 Four Winns Horizon 200DLX
Engine VOLVO PENTA 5.O 50FAPNCA
Transom Volvo Cobra SX 3868388


Top
 Profile  
 
PostPosted: Sat Aug 12, 2017 10:44 am 
Offline
email admin your custom rank

Joined: Tue Jan 18, 2011 8:45 pm
Posts: 333
Shadowr1 wrote:
Thanks all.
I was looking cap, rotor, plugs and wires.
All should be standard Ford parts.
BUT now I need to replace my u-joints and bellows.

Don't forget the gimble bearing and seal

1996 OMC Stern Drive 5 [50FAPNCA] - Parts Lookup - Crowley Marine
http://www.crowleymarine.com/johnson-evinrude/1077.cfm

https://www.google.com/url?sa=t&rct=j&q ... Pk5p-Rkaqw


Top
 Profile  
 
PostPosted: Sat Aug 12, 2017 10:52 am 
Offline
Guppy

Joined: Wed Aug 02, 2017 7:54 am
Posts: 8
Yep, planing on all bellows, gimbal bearing and anything else that creeps up.
I'm going to get the alignment tool also.

_________________
1996 Four Winns Horizon 200DLX
Engine VOLVO PENTA 5.O 50FAPNCA
Transom Volvo Cobra SX 3868388


Top
 Profile  
 
PostPosted: Mon Aug 14, 2017 9:28 am 
Offline
Guppy

Joined: Wed Aug 02, 2017 7:54 am
Posts: 8
http://www.crowleymarine.com/johnson-ev ... /56708.cfm

Number 26, the pivot(shoulder) bolt. What tool and size for it? My first thought was Torx but it has too many ''spleans''.

_________________
1996 Four Winns Horizon 200DLX
Engine VOLVO PENTA 5.O 50FAPNCA
Transom Volvo Cobra SX 3868388


Top
 Profile  
 
PostPosted: Mon Aug 14, 2017 7:32 pm 
Offline
email admin your custom rank

Joined: Tue Jan 18, 2011 8:45 pm
Posts: 333
Shadowr1 wrote:
http://www.crowleymarine.com/johnson-evinrude/parts/56708.cfm

Number 26, the pivot(shoulder) bolt. What tool and size for it? My first thought was Torx but it has too many ''spleans''.



Why do you need to remove it?
What drive do you have on it? King Cobra?
Call this guy. He is well versed in your drive
Dubberts Outdrive Services Inc - Port Clinton, Ohio
419-732-1777


Top
 Profile  
 
PostPosted: Mon Aug 14, 2017 8:22 pm 
Offline
Guppy

Joined: Wed Aug 02, 2017 7:54 am
Posts: 8
Will it be easier to change the bellows with it removed or am I making more work for myself?

_________________
1996 Four Winns Horizon 200DLX
Engine VOLVO PENTA 5.O 50FAPNCA
Transom Volvo Cobra SX 3868388


Top
 Profile  
 
PostPosted: Mon Aug 14, 2017 9:47 pm 
Offline
email admin your custom rank

Joined: Tue Jan 18, 2011 8:45 pm
Posts: 333
Shadowr1 wrote:
Will it be easier to change the bellows with it removed or am I making more work for myself?



No doubt easier but it can be done


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group