www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Wed May 22, 2024 1:34 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 23 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: ECM alarm - UPDATE
PostPosted: Wed Jun 18, 2008 2:43 pm 
Offline
email admin your custom rank

Joined: Mon Aug 06, 2007 9:02 am
Posts: 616
Location: Miami, FL
That part is the whole throttle arm which looks by the picture to have an integrated sensor #16

http://www.marinepartseurope.com/PentaP ... /22411.jpg

I think you could easily do this yourself but since you had these guys work on it a first time I agree they should get it right.

_________________
Walter
Image
2003 248 Vista - VP 5.0 GXi
2009 Toyota Tundra SR5 5.7L 4x4


Top
 Profile  
 
 Post subject: Re: ECM alarm - UPDATE
PostPosted: Sat Jun 21, 2008 6:51 am 
Offline
email admin your custom rank

Joined: Thu May 18, 2006 8:57 am
Posts: 471
I think you're right, on both accounts. My only dilema is towing it back down there. About $80 there and back. The part is going to be in on Monday and I plan to talk to the service manager about whether I should just change it myself.

Kinda strange that you can't buy this part online.

http://www.iboats.com/Throttle_Body_and ... _id.326184

_________________
Former owner of:
1996 Four Winns Horizon 200 5.8L VP
2006 Four Winns Horizon 260 8.1L VP
2007 Sea Ray 290 Sundancer

Current boat
2004 Sea Ray 290 Sun Sport Twin 350 Mags

Image


Top
 Profile  
 
 Post subject: Re: ECM alarm - UPDATE
PostPosted: Sat Jun 21, 2008 7:03 pm 
Offline
email admin your custom rank

Joined: Mon Aug 06, 2007 9:02 am
Posts: 616
Location: Miami, FL
cincy,

if your within 2 years warranty the part. i know this could be a problem since the dealers can take weeks with the boat but your may do the warranty for you and allow you to put it in. I'm pretty certain you can do this within an hour.

_________________
Walter
Image
2003 248 Vista - VP 5.0 GXi
2009 Toyota Tundra SR5 5.7L 4x4


Top
 Profile  
 
 Post subject: Re: ECM alarm - UPDATE
PostPosted: Sat Jun 21, 2008 7:05 pm 
Offline
email admin your custom rank

Joined: Mon Aug 06, 2007 9:02 am
Posts: 616
Location: Miami, FL
One other thing if you really think your ECM alert is due to electrical check out the canon plug main harness and make sure that it is sitting nice and tight. This was causing me endless grief!

_________________
Walter
Image
2003 248 Vista - VP 5.0 GXi
2009 Toyota Tundra SR5 5.7L 4x4


Top
 Profile  
 
 Post subject: Re: ECM alarm - UPDATE
PostPosted: Sun Jun 22, 2008 2:48 pm 
Offline
email admin your custom rank

Joined: Thu May 18, 2006 8:57 am
Posts: 471
captwalt wrote:
One other thing if you really think your ECM alert is due to electrical check out the canon plug main harness and make sure that it is sitting nice and tight. This was causing me endless grief!


What the heck is this??

I'm out of warranty.

_________________
Former owner of:
1996 Four Winns Horizon 200 5.8L VP
2006 Four Winns Horizon 260 8.1L VP
2007 Sea Ray 290 Sundancer

Current boat
2004 Sea Ray 290 Sun Sport Twin 350 Mags

Image


Top
 Profile  
 
 Post subject: Re: ECM alarm - UPDATE
PostPosted: Sun Jun 22, 2008 5:10 pm 
Offline
email admin your custom rank

Joined: Mon Aug 06, 2007 9:02 am
Posts: 616
Location: Miami, FL
I have a 5.0 so it may be in a different location for you but on the starboard rear top side of my engine is the canon plug which is the main harness that connects all of your boat wiring (gauges, trim, etc) to the engine.

_________________
Walter
Image
2003 248 Vista - VP 5.0 GXi
2009 Toyota Tundra SR5 5.7L 4x4


Top
 Profile  
 
 Post subject: Re: ECM alarm - UPDATE
PostPosted: Sun Jun 22, 2008 5:53 pm 
Offline
email admin your custom rank

Joined: Thu May 18, 2006 8:57 am
Posts: 471
Thanks. I'll take a look at those too. This is the alleged culprit. Took me all of 2 minutes to remove including removal of the engine cover. I'm having my dealer send me the new one. No point in hauling it down there at the cost of $80 plus labor for them to do 2 minutes worth of work. Hopefully, this will resolve it. It acted up at the beginning of the day on saturday but was then fine all weekend.

Image

_________________
Former owner of:
1996 Four Winns Horizon 200 5.8L VP
2006 Four Winns Horizon 260 8.1L VP
2007 Sea Ray 290 Sundancer

Current boat
2004 Sea Ray 290 Sun Sport Twin 350 Mags

Image


Top
 Profile  
 
 Post subject: Re: ECM alarm - UPDATE
PostPosted: Sun Jun 22, 2008 8:14 pm 
Offline
email admin your custom rank

Joined: Mon Aug 06, 2007 9:02 am
Posts: 616
Location: Miami, FL
2 mins slightly better than my 1 hour estimate ;)

good luck!

_________________
Walter
Image
2003 248 Vista - VP 5.0 GXi
2009 Toyota Tundra SR5 5.7L 4x4


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page Previous  1, 2

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 39 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group