| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Bearing Dust Cap Size https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=10351 |
Page 1 of 1 |
| Author: | mttpalmer [ Mon Sep 17, 2012 7:08 pm ] |
| Post subject: | Bearing Dust Cap Size |
I lost a dust cap on the highway and cannot determine what size replacement I need. It's a dual axle factory trailer for a 2003 Sundowner 245. Four Winns parts site lists it as only "ACRA LUBE END CAP 14" with a part number of 005-0903. Any info is much appreciated, as well as thoughts on where I can purchase a replacement, preferably over the counter since I have to get moving on pulling the boat and getting ready for a Vermont winter! Thanks! |
|
| Author: | skidaddytn [ Mon Sep 17, 2012 10:20 pm ] |
| Post subject: | Re: Bearing Dust Cap Size |
I replaced mine cause one was leaky and softer than the other Could not find them local anywhere checked all auto parts stores, west marine and even uhaul Ended up getting them off of ebay for cheap |
|
| Author: | 97_245_sd [ Sat Sep 22, 2012 7:29 pm ] |
| Post subject: | Re: Bearing Dust Cap Size |
Is this the rubber cap that you pull off to get to the grease fitting? If so I found at a local trailer parts store. Different brand but fit perfectly. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|