www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Wear Sleeave https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=11420 |
Page 1 of 1 |
Author: | baileyjd1 [ Thu May 09, 2013 6:28 am ] |
Post subject: | Wear Sleeave |
I have a 2004 Four Winns tandem axle trailer that I need to replace the wear sleeves on the axle spindles. Cannot locate anyone locally who can get what I need. Any suggestions out there? |
Author: | neutron [ Thu May 09, 2013 7:27 am ] |
Post subject: | Re: Wear Sleeave |
what do you mean by wear sleeve, the part where the seal rides? |
Author: | Thalasso [ Thu May 09, 2013 8:31 am ] |
Post subject: | Re: Wear Sleeave |
It's called a speedi sleeve www.easternmarine.com › ... › Grease Seals & Oil Seals |
Author: | baileyjd1 [ Thu May 09, 2013 10:31 am ] |
Post subject: | Re: Wear Sleeave |
Yes - where the seal rides. I bought this boat and trailer used last year and wanted to check the bearings prior to taking out this season. The first wheel I pulled off had the face of the sleeve worn in two. I was hoping to get them from a Four Winns dealer. |
Author: | neutron [ Thu May 09, 2013 1:26 pm ] |
Post subject: | Re: Wear Sleeave |
Thalasso wrote: It's called a speedi sleeve http://www.easternmarine.com › ... › Grease Seals & Oil Seals Thanks for the link I was actually looking for these and couldnt seem to get the name right for the search, I am replacing my backing plates, shoes, w/cylinders, etc... and I had seen that the old grease seals were a bit chewed up from the surface where it rides |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |