www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Four winns vista 268 towing
https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=14016
Page 1 of 1

Author:  zeberifo1 [ Mon May 18, 2015 4:51 pm ]
Post subject:  Four winns vista 268 towing

Hi everyone,
Need to pull my trailer home and don't know what ball size I need to pull it.
Standard four winns double axle trailer for my 268.
Thanks!

Author:  ric [ Mon May 18, 2015 5:31 pm ]
Post subject:  Re: Four winns vista 268 towing

Oh god I hope it's 2 5/16 otherwise that's sketchy.

Author:  Flyer51 [ Mon May 18, 2015 7:13 pm ]
Post subject:  Re: Four winns vista 268 towing

Mine is 2 5/16 on the trailer for my 278. No reason to suspect yours would be any different.

Author:  crossram [ Mon May 18, 2015 8:56 pm ]
Post subject:  Re: Four winns vista 268 towing

i have a 245 and its a 2 5/16

Author:  babbot1 [ Wed May 20, 2015 3:54 pm ]
Post subject:  Re: Four winns vista 268 towing

Most likely 2 5/16 but it should have a stamp on the hitch. Usually on top.

Author:  Surface Interval [ Thu May 21, 2015 10:00 pm ]
Post subject:  Re: Four winns vista 268 towing

Yes. 2 5/16 ball. We tow every weekend.

Author:  Obie [ Mon May 25, 2015 10:21 pm ]
Post subject:  Re: Four winns vista 268 towing

Make sure it is the right size and the right weight limit. I towed my new Sundowner 255 (7,000 lbs) home from the dealer only find that he installed a 2 5/16 inch ball with a 5,000 lbs weight limit.

Author:  powellcrazy [ Thu Jul 16, 2015 10:08 pm ]
Post subject:  Re: Four winns vista 268 towing

Never assume or go with what we use for our set up. Look at coupler and find out what size it is.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/