www.iFourWinns.com

Hello all,

Have a '99 h220 with the original four winns trailer. I lost one of the rubber plugs that fit in the acculube hubs. There isn't much in the way of parts stores where we keep the boat, so it took me a while to get a replacement. When I went to put the new plug in, I realized the grease zerk is now sitting to far out of the hub to fit the plug in. How do I push the fitting back in? Do I have to disassemble? Anyone have a diagram/breakdown of this?

Thanks a ton,
Matt

_________________
1999 Horizon 220 5.7GSi DP
2005 Toyota Tacoma Double Cab TRD Off-Road

If it is the kind of hub that the grease zerk is in the spindle and the zerk is out to far, it is more like the hub is in too far, you may have a bearing issue, have they been checked lately?

_________________
Jeff

'14 Cruisers 380 Express "Simon Sez"
Merc 8.2 Mag MPI 380
DTS B3X, (x2) Axius Premier


(SOLD)
'08 V318
Merc 350 Mag MPI 300
DTS Seacore, B3 (x2)

Are you sure you didn't lose the whole cap?

http://www.championtrailers.com/dust_caps.html

_________________
2002 Horizon 190 5.0gl

This is exactly what happened. Amazing how simple things can be when somebody else points out the obvious. Thanks for your help. I'm going to go feel sheepish now.

_________________
1999 Horizon 220 5.7GSi DP
2005 Toyota Tacoma Double Cab TRD Off-Road