www.iFourWinns.com

Looking at replacing my FourWinns crap bow rollers on my trailer. They Measure 8" across anyone have any good suggetions as to a AWESOME brand or site to get them at???

_________________
06 Horizon 260 VP 8.1 Corsa Captains Call
"INFIDEL"

+1 Same question. I noticed the last 2 times out that my rollers all of a sudden are getting really torn up and getting residue all over the bow when I crank the boat up.

_________________
Norris Lake, Stardust Marina, Andersonville, TN
2005 Four Winns 230 Horizon 5.7L Volvo Gi/DP
2001 Maxum 1900SR 5.0L V8 (Sold)
2011 Nissan Armada Platnum

I believe I picked mine up from Wholesale Marine. http://www.wholesalemarine.com although any marine supply house will carry them.

_________________
2007 358 T-5.7GXi IB
Previous Boats
'08 H240, '08 V318, '04 268, '04 225

Mine are starting to get pretty ugly as well. I bought a full bow roller assembly (two large outside portions with 4" middle roller and the bolt) from Overton's. I didn't like the outside portions of the one's from Overton's as they seemed extremely rigid compared to mine and had a different diameter & shape. I'm thought they might flatten my anchor locker drain so I didn't put in on. I was at my local marina the other day and saw they were selling roller odds & ends and found some to match my middle section rollers for $6/each. I picked up two and plan on putting them on next time I get the boat out. This will let me change out the bad pieces for relatively cheap as compared to replacing the whole roller assembly. I doubt these are "AWESOME" rollers, but you may want to check with your local marina to see if they are cleaning house on spares. Hopefully I can still return the Overton's bow roller assembly. If not, I'm sure it will fit one of my buddy's boats.

_________________
2005 FW Horizon 250
8.1L VP DP