Okay, so Tiedown confirmed the 81316 Seal is interchangeable with the 81166
http://www.easternmarine.com/grease-seal-81316
$5.63
$23 shipping to Canada
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Turbo Lube oil bath problem/questions https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=9147 |
Page 2 of 2 |
| Author: | blue dragon [ Tue Nov 17, 2015 7:35 am ] |
| Post subject: | Re: Turbo Lube oil bath problem/questions |
jacknbella wrote: I bought my last set of OEM triple lip seals from http://www.theoempartsstore.com Cost is about $8/seal... good luck! Do you remember what the part number is? I'm guessing its this one http://www.theoempartsstore.com/product ... 026&page=1 |
|
| Author: | jacknbella [ Tue Nov 17, 2015 9:27 am ] |
| Post subject: | Re: Turbo Lube oil bath problem/questions |
My seals are smaller than yours so my part numbers will not apply. However, I'm 99% sure they are the same design as yours though, just in a different size range. My seals: Triple Lip 1.719x2.565x.50 (part number 171255UC) |
|
| Author: | blue dragon [ Tue Nov 17, 2015 12:48 pm ] |
| Post subject: | Re: Turbo Lube oil bath problem/questions |
Okay, so Tiedown confirmed the 81316 Seal is interchangeable with the 81166 http://www.easternmarine.com/grease-seal-81316 $5.63 $23 shipping to Canada
|
|
| Author: | LouC [ Tue Nov 17, 2015 4:22 pm ] |
| Post subject: | Re: Turbo Lube oil bath problem/questions |
Crazy shipping cost! Can you source them locally? I have a couple of local trailer places that can get me standard stuff like wheel cylinders, seals, even complete backing plates. |
|
| Author: | LouC [ Tue Nov 17, 2015 4:25 pm ] |
| Post subject: | Re: Turbo Lube oil bath problem/questions |
Crazy shipping cost! Can you source them locally? I have a couple of local trailer places that can get me standard stuff like wheel cylinders, seals, even complete backing plates. I'd be tempted to take one of the old ones to a trailer shop and see if they can match em up... |
|
| Author: | blue dragon [ Wed Nov 18, 2015 9:22 pm ] |
| Post subject: | Re: Turbo Lube oil bath problem/questions |
I just bit the bullet and ordered online, don't have the time to shop around locally |
|
| Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|