| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Port side vent https://www.smwebhead.com/phpBB3/viewtopic.php?f=13&t=10853 |
Page 1 of 1 |
| Author: | Water Boy 1950 [ Wed Jan 09, 2013 10:11 am ] |
| Post subject: | Port side vent |
Hey guys, anyone know where I might get a replacement port side vent window for my 88 241 Libby? |
|
| Author: | SmittyDFW1 [ Wed Jan 09, 2013 1:24 pm ] |
| Post subject: | Re: Port side vent |
Water Boy 1950 wrote: Hey guys, anyone know where I might get a replacement port side vent window for my 88 241 Libby? If you find one I'd like to know where to get one also because mine is missing. |
|
| Author: | jvthundercat [ Fri Jan 11, 2013 10:10 am ] |
| Post subject: | Re: Port side vent |
Are you talking about the chrome luvers for the engine compartment? |
|
| Author: | rpengr [ Fri Jan 11, 2013 1:11 pm ] |
| Post subject: | Re: Port side vent |
jvthundercat wrote: Are you talking about the chrome luvers for the engine compartment? He is probably talking about the somewhat triangular window that opens up...at the side corner of the main windshield. Might have to have a local glass company cut a replacement if you cannot find one. |
|
| Author: | SmittyDFW1 [ Fri Jan 11, 2013 4:54 pm ] |
| Post subject: | Re: Port side vent |
rpengr you are correct sir. In fact the whole frame is missing. I am I am thinking I will have to find a salvage yard online for it. |
|
| Author: | Water Boy 1950 [ Mon Jan 14, 2013 7:38 am ] |
| Post subject: | Re: Port side vent |
Yes, definitely speaking of the port side vent portion of the windscreen. |
|
| Author: | gaw951 [ Sat Aug 23, 2014 8:50 pm ] |
| Post subject: | Re: Port side vent |
jvthundercat wrote: Are you talking about the chrome luvers for the engine compartment? Speaking of the luvers, I have a 87 Libby 241 and the luvers are poorly designed and sit at a very bad angle so water comes into the engine compartment any time it rains. Anyone else have this issue? I know the simple solution in to store inside but that is not an option till fall as there are numerous things that are already in my "parking space" till they are sold. The previous owner said he would just cover them with duct tape when he has store outside for any period of time but I'd like something a little more permanent that I don't have to take off every time I want to put her in the water. |
|
| Author: | Warnerzibre [ Sun Jan 13, 2019 8:57 am ] |
| Post subject: | Port side vent |
Are you trimming all the way up at WOT? If not the P factor of the prop can cause listing to port |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|