| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Exhaust Bellow https://www.smwebhead.com/phpBB3/viewtopic.php?f=13&t=13105 |
Page 1 of 1 |
| Author: | Serial Wakest [ Wed Jul 02, 2014 12:23 pm ] |
| Post subject: | Exhaust Bellow |
Heys guys, doing some comparing with a buddies 1988 sundowner and my same year Horizon same 4.3 motors. I noticed his exhaust bellow coming into the out drivers solid with no slits on the bottom where mine had consist holes in the bottom of my rubber bellow. Anybody know the difference? |
|
| Author: | Jdpber [ Wed Jul 02, 2014 1:04 pm ] |
| Post subject: | Re: Exhaust Bellow |
one has the drop out holes for if the drive ever has a clog and the other has no bypass slats.. |
|
| Author: | rpengr [ Wed Jul 02, 2014 1:20 pm ] |
| Post subject: | Re: Exhaust Bellow |
They added the slots about 20 years ago. I figure they were added so that it doesn't hold water in there when the boat is pulled out. |
|
| Author: | LouC [ Wed Jul 02, 2014 1:30 pm ] |
| Post subject: | Re: Exhaust Bellow |
The original style did not have the slits, but all the ones made after a certain date do. I heard it was to reduce back pressure but who knows, the water draining may be the reason as well. |
|
| Author: | Serial Wakest [ Wed Jul 02, 2014 6:12 pm ] |
| Post subject: | Re: Exhaust Bellow |
Thanks fellas, always a great help. Boats were the same year scared me for a bit. |
|
| Author: | rpengr [ Thu Jul 03, 2014 8:07 am ] |
| Post subject: | Re: Exhaust Bellow |
Your buddy could cut a couple holes in the bottom of his exhaust bellows if he wanted to. But let me add: The upper bellows (Drive Shaft Bellows) MUST remain water tight. Any signs of cracking in the upper bellows means that it should be replaced. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|