www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
engine running hot, 1994 OMC Cobra 3.0L https://www.smwebhead.com/phpBB3/viewtopic.php?f=13&t=15406 |
Page 2 of 2 |
Author: | supermanotorious [ Mon May 22, 2017 7:36 am ] |
Post subject: | Re: engine running hot, 1994 OMC Cobra 3.0L |
got on the water yesterday, at full throttle, the temp finally hit 120, I believe water is bypassing the tstat |
Author: | supermanotorious [ Wed May 24, 2017 8:54 am ] |
Post subject: | Re: engine running hot, 1994 OMC Cobra 3.0L |
does anyone have a diagram to show me the function of the tstat housing? as in flow of water with tstat closed, open, etc. and show me the different outlets so I can troubleshoot if mine is really letting water around the tstat |
Author: | supermanotorious [ Tue Mar 19, 2019 5:17 pm ] |
Post subject: | Re: engine running hot, 1994 OMC Cobra 3.0L |
Yes I'm bringing up an old thread but it's still a valid issue on my rig. Since I last posted I ordered a new-to-me tstat housing from ebay which is in better shape then mine, I believe deterioration in my housing is allowing water around the tstat. Also since I last posted, I've become a powdercoater! I think I'll strip all the rust off this new housing by chemically soaking it, then I'll powdercoat the inside to see if that will mitigate rust. |
Author: | YYZ-RC [ Tue Mar 19, 2019 8:26 pm ] |
Post subject: | Re: engine running hot, 1994 OMC Cobra 3.0L |
My 5.7 runs cold too. At idle it will get up to 160 and stay there (t-stat opens) but as soon as I'm underway it drops to 110-120. Replaced and verified t-stat at 160, replaced temp sender, checked all hoses for blockages, checked riser temps with infra red thermo, etc. |
Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |