www.iFourWinns.com

I have got some rust stains in the anchor well from a rusted chain, have removed the rusty chain and replaced with stainless steel, any hints to remove the stains as i cannot get the buff in there and hand polishing has proved useless
Regards Scott

_________________
2005 Four Winns Sundowner (Sold)
350 MAG B1

I've had good luck with Starbrite Hull Cleaner for stubborn stains, including rust. If that doesn't work you could try Iron Out or a similar iron stain powder. Wear gloves with either of those products, and if you end up using one of the caustic powders, make sure you have plenty of ventilation - the fumes are really strong.

Joe

_________________
USCG 50 Ton Master Inland/OUPV Endorsement+Towing

1998 278 Vista - Twin 4.3 GLs, Kohler 4KW Gen, AC/Heat.
1999 Yamaha Waverunner SUV
2003 Yamaha Waverunner SUV w/MR-1 HO conversion

Maybe try CLR (Calcium, Lime, & Rust) Cleaner?

_________________
2007 Horizon 200
4.3L GXi/ SX 225 HP

will that work on those marks u get under fittings. around one of the cleats on the side of the hull there are small stains on the gelcoat. I thought somewhere you could use something, maybe like the CLR, rather then just cutting polish...

_________________

Scott,
How are you i didnt see you out this summer, have you been launching much at apple tree bay

_________________
2005 Four Winns Sundowner (Sold)
350 MAG B1