www.iFourWinns.com • View topic - replacing wood behind seat back

View unanswered posts | View active topics

Board index » Care and feeding » General Care

All times are UTC - 6 hours [ DST ]

replacing wood behind seat back

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

djflory

Post subject: replacing wood behind seat back

Posted: Tue Aug 17, 2010 8:42 pm

Tadpole

Joined: Tue Aug 17, 2010 8:34 pm
Posts: 3

I need to replace the wood behind the seat back on the side of my bowrider. The Vinyl is good. Anyone done this? Are there any web sites that might be helpful? It does not look too difficult. I assume marine grade plywood must be used. Any help would be welcome.

Top

jvthundercat

Post subject: Re: replacing wood behind seat back

Posted: Thu Aug 19, 2010 3:49 pm

email admin your custom rank

Joined: Thu May 28, 2009 11:30 pm
Posts: 503
Location: Kansas

Make sure of a few things.
The right type and length of staples.
You have to heat the vinyl and stretch it back in place or it will be loose. A good heat gun will do, but not too hot to burn it.
Make sure you use treated or marine wood, or you will be doing it again.

_________________
1992 Baja 38 Special Twin 502 Mags

03 Stingray 3.0
88 261 Liberator 460 King Cobras
95 Bayliner 1850 3.0
77 Fiber Form 20ft 350/385hp
70 Wescraft 1800 SS 455 Jet

Lead, Follow, or get the Hell out of the Way!

Top

Page 1 of 1

[ 2 posts ]

Board index » Care and feeding » General Care

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum