| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| replacing wood behind seat back https://www.smwebhead.com/phpBB3/viewtopic.php?f=14&t=6408 |
Page 1 of 1 |
| Author: | djflory [ Tue Aug 17, 2010 8:42 pm ] |
| Post subject: | replacing wood behind seat back |
I need to replace the wood behind the seat back on the side of my bowrider. The Vinyl is good. Anyone done this? Are there any web sites that might be helpful? It does not look too difficult. I assume marine grade plywood must be used. Any help would be welcome. |
|
| Author: | jvthundercat [ Thu Aug 19, 2010 3:49 pm ] |
| Post subject: | Re: replacing wood behind seat back |
Make sure of a few things. The right type and length of staples. You have to heat the vinyl and stretch it back in place or it will be loose. A good heat gun will do, but not too hot to burn it. Make sure you use treated or marine wood, or you will be doing it again. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|