| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Surface Rust Removal https://www.smwebhead.com/phpBB3/viewtopic.php?f=14&t=6787 |
Page 1 of 1 |
| Author: | Bob2135 [ Tue Oct 19, 2010 3:41 pm ] |
| Post subject: | Surface Rust Removal |
Can anyone suggest an effective product for surface rust removal. The new boat we are getting ready to get delivered is a "salty" and we boat in fresh water, but...there is some superficial surface rust on various screws, bolts, engine mounting brackets etc....generally I want to remove and clean all these surfaces, and after checking on the replacement costs of these bolts ($300) as quoted by a VP parts dealer...I am going to do this on my own. I would like to remove all the rust, clean, then I will re-paint the items in black (possibly rust-o-lium) Wondering if anyone can provide advice. Thanks |
|
| Author: | 230 Mike [ Tue Oct 19, 2010 4:18 pm ] |
| Post subject: | Re: Surface Rust Removal |
For various large & small hardware, you might need more than one approach depending on the piece. For many things like stainless, chrome, bronze, and even clear plastics, Autosol has been all the rave lately among tool collectors/restorers (those guys are religious about rust removal/protection). I've never used it but will have some delivered tomorrow. http://www.use-enco.com/CGI/INSRIT?PMAK ... TPG=INLMK3 Here's an example of one guy's experience with Autosol (this is ductile cast iron though): http://www.forums.woodnet.net/ubbthread ... o=&fpart=1 I've also used Flitz on stainless and it works well. Some parts might turn out better using some very mild abrasive. I can recommend the Sandflex Hand Block in fine grit: http://www.amazon.com/Sandflex-Tool-Cle ... y_ol_img_b It's like a stiff rubber block with tiny abrasive particles. As you rub the item, it wears away. |
|
| Author: | Bob2135 [ Wed Oct 20, 2010 8:34 am ] |
| Post subject: | Re: Surface Rust Removal |
Thanks Mike, I will check it out! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|