www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Adhesive on Gelcoat https://www.smwebhead.com/phpBB3/viewtopic.php?f=14&t=6847 |
Page 1 of 1 |
Author: | Off-Piste [ Sun Nov 07, 2010 1:15 pm ] |
Post subject: | Adhesive on Gelcoat |
I've been working through water in the forward bilge on my Vista 258 all summer. It is now winterized in drystack and I know that at least one source of water has to be exterior, probably the anchor compartment. The drystack people are great, but I have to work outside, and in Seattle it will now rain for the next 5 months. I'd like to just tape over the anchor openings. I'm thinking duct tape, and then using a solvent in the spring to remove it. My concern is I don't want to damage the gel coat. |
Author: | Aussie_Horizon_190 [ Sun Nov 07, 2010 8:42 pm ] |
Post subject: | Re: Adhesive on Gelcoat |
To remove the tape adhesive try either Eucalyptus Oil or Citrus Oil - these will break down the adhesive without harming the gelcoat - and smell great as a bonus! |
Author: | Off-Piste [ Mon Nov 08, 2010 5:21 pm ] |
Post subject: | Re: Adhesive on Gelcoat |
Thanks Aussie, I now have a plan. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |