www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

wiring harness?
https://www.smwebhead.com/phpBB3/viewtopic.php?f=19&t=5526		 Page 1 of 1
Author:  drballard33 [ Tue May 04, 2010 11:08 am ]
Post subject:  wiring harness?
does anyone make a wiring harness for the four winns? Just out of curiousity. I have a new pioneer head unit that I want to install to replace the stock kenwood thats in it now. Obviuosly if there was a wiring harness that could just plug into it that would be great. I havent looked back there to see what it looks like yet.
Author:  impulse [ Tue May 04, 2010 12:57 pm ]
Post subject:  Re: wiring harness?
Crutchfield comes to mind. They always provide the matching harness to whatever vehicle you are installing, you just have to mate all the wires correctly between the radio harness and the vehicle harness. I've never checked to see if they do marine harnesses, but I know they are carrying a lot more marine stuff these days. They are always very helpful, might try giving them a call.
Author:  Castaicpiper [ Thu May 06, 2010 9:11 pm ]
Post subject:  Re: wiring harness?
I just changed my stereo and spiced into the original harness. The color coding for the speakers are the same. I hook up both power wires from the stereo to the constant hot because I listen while the key is turned off.
Author:  drballard33 [ Wed May 12, 2010 6:42 pm ]
Post subject:  Re: wiring harness?
what type of connectors do you guys use when connecting the wires from the back of the wiring harness?
Author:  impulse [ Thu May 13, 2010 8:23 am ]
Post subject:  Re: wiring harness?
drballard33 wrote:
what type of connectors do you guys use when connecting the wires from the back of the wiring harness?


I like the snap bullet type connectors, that way I can disconnect the whole thing or individual wires if needed. Lowes/HomeDepot/Ace all have them.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/