www.iFourWinns.com

Hey guys , i noticed a super small knick in my vinyl on my interior gunwall sides. What can i put on it to prevent it from getting bigger and to keep water out.. super glue? any ideas? sorry for something so tiny and silly but I'm abit OCD when it comes to the boat.. I love having it spotless and looking new.. lol

_________________
1997 Horizon RS 180
5.7 GL Volvo Penta /SX drive. (1.60)
2018 Ford F-150 super crew 4x4

go to the auto parts store and get a vinyl repair kit

_________________
2005 vista 288

I bought one of these for a small tear in my back seat. Haven't gotten around to using it yet though. Keep forgetting as the tear is not in a conspicuous spot.
http://www.amazon.com/gp/product/B005CE ... detailpage

_________________
-Andrew

1984 Four Winns 225 Sundowner
5.0L Mercruiser, Alpha 1

Well I will give them a call and see what they have.. Thanks fellas

_________________
1997 Horizon RS 180
5.7 GL Volvo Penta /SX drive. (1.60)
2018 Ford F-150 super crew 4x4

+1 on the Tear-Aid.

I had the same problem on my 96, there was a small nick in one of the seats where it bends around the seat base and there was an "oops" mark on the gunnel vinyl upholstery from the previous owner which coincidentally lines up with the Bimini support pole when you try and lower the top alone...

I used the Tear-Aid on both spots and they're hardly noticeable. Like anything adhesive, results are ALL in the prep work. Having my own case of severe OCD, this was no problem. After prepping the area, I put small patches over the tears. The sheets come square, but I cut them round to minimize the chance of a corner being lifted up. After setting up in the sun for a few hours both spots are as good as new, the clear patches are not going anywhere and are firmly affixed.

_________________
1996 205 Sundowner
"Comin' in Hot!"