www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sun Apr 28, 2024 2:38 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: vista 318 06-09
PostPosted: Mon Jan 04, 2016 8:01 pm 
Offline
Minnow

Joined: Fri Aug 14, 2015 12:51 pm
Posts: 16
Need to know the max width of a 318 at the water line. I know the beam is 10'9".. It tapers down a bit to the water. That being said can someone measure the width of the boat at the water line down from the 10' 9" width. I guessing it to be around 10' 2"

Thx


Top
 Profile  
 
 Post subject: Re: vista 318 06-09
PostPosted: Mon Jan 04, 2016 8:14 pm 
Offline
Seahorse

Joined: Sun Oct 14, 2012 9:44 pm
Posts: 27
I am not sure exactly what it is at the waterline, I am assuming you need to know for dock size. I have a 2008, 318, and I have a 12'dock.

Bobre

_________________
2008 - 318/350 mag's
HAPPY HOUR
Lake Norman
Cornelius NC
Previous 2000 - 268/7.4


Top
 Profile  
 
 Post subject: Re: vista 318 06-09
PostPosted: Mon Jan 04, 2016 9:24 pm 
Offline
Minnow

Joined: Fri Aug 14, 2015 12:51 pm
Posts: 16
I will have a 10'6" dock per HOA restrictions. Can you measure from each side of boat at water line to dock? This should give me a pretty good estimate.


Top
 Profile  
 
 Post subject: Re: vista 318 06-09
PostPosted: Mon Jan 04, 2016 9:25 pm 
Offline
Minnow

Joined: Fri Aug 14, 2015 12:51 pm
Posts: 16
Trying to squeeze in a 318 vs going down to a 288.


Top
 Profile  
 
 Post subject: Re: vista 318 06-09
PostPosted: Tue Jan 05, 2016 7:41 am 
Offline
email admin your custom rank

Joined: Sun Dec 07, 2008 11:07 am
Posts: 815
Location: Freeland, MI
I used to trailer my 318. I have a couple pics I could txt or email. My best guess is a 318 is 10' at the waterline. My trailer was 120" wide at the fenders and the water line was right above it.

Pm me if you want the pics cause I don't get on here as often anymore.

_________________
Jeff

'14 Cruisers 380 Express "Simon Sez"
Merc 8.2 Mag MPI 380
DTS B3X, (x2) Axius Premier


(SOLD)
'08 V318
Merc 350 Mag MPI 300
DTS Seacore, B3 (x2)

Image


Top
 Profile  
 
 Post subject: Re: vista 318 06-09
PostPosted: Tue Jan 05, 2016 9:13 am 
Offline
Minnow

Joined: Fri Aug 14, 2015 12:51 pm
Posts: 16
Thx Jeff. Plz email the pics


Top
 Profile  
 
 Post subject: Re: vista 318 06-09
PostPosted: Tue Jan 12, 2016 12:17 am 
Offline
email admin your custom rank

Joined: Sun Dec 07, 2008 11:07 am
Posts: 815
Location: Freeland, MI
I'm going to need your email address.

_________________
Jeff

'14 Cruisers 380 Express "Simon Sez"
Merc 8.2 Mag MPI 380
DTS B3X, (x2) Axius Premier


(SOLD)
'08 V318
Merc 350 Mag MPI 300
DTS Seacore, B3 (x2)

Image


Top
 Profile  
 
 Post subject: Re: vista 318 06-09
PostPosted: Thu Jan 14, 2016 8:35 pm 
Offline
Dolphin
User avatar

Joined: Fri May 16, 2014 8:17 pm
Posts: 99
Location: Bridge Port Marina - Orillia
I have an exact 12 foot slip and my boat with a 12 foot beam - not sure of the exact measurement at the waterline, but it does fit as long as the side docks are not too high as seen in picture below. If my side docks were a foot or two higher it would not fit. As mentioned earlier, the decreasing beam from the maximum beam down to the waterline is significant enough to give me a couple inches on each . I have squeezed a couple small fenders in, but no longer do so anymore as I would often forget them when exiting the slip and they would hang-up on the rollers at the slip entrance.

Image

_________________
Image
Ernie Follis
It'll Do II
Four Winns 348 (2005)


Top
 Profile  
 
 Post subject: Re: vista 318 06-09
PostPosted: Mon Jan 18, 2016 2:50 pm 
Offline
Minnow

Joined: Fri Aug 14, 2015 12:51 pm
Posts: 16
Thx for the reply.

Nice Boat !!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group