www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
What are your thoughts on this hull blast job??? https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=14796 |
Page 2 of 2 |
Author: | jdubya301 [ Wed Apr 27, 2016 7:05 pm ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
Quote: Oh, and on a different note, is that actually a 2 by 4 board turned on its side as a keel block? Not to be picky, but I don't like that either. It's a 6x6! This is a vista 298. The scale is weird in some of the photos. |
Author: | jdubya301 [ Mon May 02, 2016 1:02 pm ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
Update: I opened up a claim with my insurance company... They sent a surveyor out today, and he doesnt believe the blast job was anything out of the ordinary, and will not pursue the claim further. Spoke with one of the most highly regarded fiberglass guys in the area. He mentioned that the burnout on the strakes is totally normal, but the hull should not have been texturized as it has. He will be going out to the yard today to give me an estimate. The yard will do two coats of interprotect HS at 34.00 a foot, and multiseason antifoul at 20.00 a foot. for a total of around 1350. Im not sure 2 coats of barrier is enough!!! also, since boats are behind me they want to charge me 217 to move and reblock... UGH! |
Author: | 230 Mike [ Mon May 02, 2016 2:45 pm ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
Which insurance company? |
Author: | jdubya301 [ Mon May 02, 2016 3:10 pm ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
230 Mike wrote: Which insurance company? Seaworthy/ geico |
Author: | 298VISTA2000 [ Fri Jun 10, 2016 8:47 pm ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
Did you by chance have a lot of blistering? If so, this might have been the right approach and least costly. If not, this has got to be the sorriest example of how to prep your boat for bottom painting that I have ever seen. |
Author: | jdubya301 [ Fri Jun 10, 2016 8:59 pm ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
no blistering whatsoever. The term hasn't come up once in any discussion. |
Author: | alex8q4 [ Sat Jun 11, 2016 8:07 pm ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
Lawyer |
Author: | Jdpber [ Sun Jun 12, 2016 7:21 am ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
Agree lawyer Also that surveyer was retarded, I've shown this to my dad an ABYC certified among 3 other global certifications, and he said that no way would this have ever passed the OK approval. This needs to be brought up in court or sell the boat as this work is horrible. Secondly find a new yard as these people do not know how to do anything remotely close to amateurs work let alone professional work. I can do a better job in my driveway. This is simply a dis raise to the boating industry for them to cal this professional work! |
Author: | LouC [ Sun Jun 12, 2016 10:29 am ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
Agree on all of the above. They did not even fix the damage on the strake that you can see there which is not a difficult repair. The problem with hull blasting is that it is hard to find someone who knows what they are doing and will take the time to do it right. Even one of the best paint & glass shops on LI could only recommend one company to me when asked about it. I decided to have my yard guy just pressure wash off the loose stuff and feather sand in the bare spots. We may then go with an ablative as long as the remaining hard epoxy anti fouling is in good shape. It's a chronic problem with boats that were painted every year with the old school hard epoxy paints. |
Author: | babbot1 [ Mon Jun 13, 2016 1:18 pm ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
UGH!! You have had one big headache... and what's up with painting right up to all the metal components? Hope that paint doesn't have any copper or other metal minerals.... |
Author: | jdubya301 [ Tue Jun 14, 2016 4:51 pm ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
babbot1 wrote: UGH!! You have had one big headache... and what's up with painting right up to all the metal components? Hope that paint doesn't have any copper or other metal minerals.... They are supposed to apply Interlux CSC.. which i assume has copper in it. |
Author: | babbot1 [ Wed Jun 15, 2016 6:23 am ] |
Post subject: | Re: What are your thoughts on this hull blast job??? |
On the interlux website it states they use less copper with their new formula but still use copper. If they do paint all the way to the metal components I would go back and sand the edges so it doesn't touch when they are done. You can get corrosion from the 2 dissimilar metals. |
Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |