www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Shift Cable - Bravo 3 https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=15099 |
Page 1 of 1 |
Author: | deafwish [ Tue Aug 09, 2016 3:14 am ] |
Post subject: | Shift Cable - Bravo 3 |
Hey Team, What are some ways to test whether a lower or upper shift cable is corroded? My 5.7 EFI with Bravo 3 seems a challenge to engage reverse... Cheers. |
Author: | 230 Mike [ Tue Aug 09, 2016 12:09 pm ] |
Post subject: | Re: Shift Cable - Bravo 3 |
How old is it? If more than 5 years, you're probably better off to just replace. |
Author: | deafwish [ Tue Aug 09, 2016 4:05 pm ] |
Post subject: | Re: Shift Cable - Bravo 3 |
She's a 2001 model, so yes. I see that the lower should be done by a Mechanic, but is the upper a simplistic job? Does one normally fail first? Never really even looked at one, as all past boats were perfect... |
Author: | 230 Mike [ Tue Aug 09, 2016 5:32 pm ] |
Post subject: | Re: Shift Cable - Bravo 3 |
Hopefully a B3 person will chime in but, if one of them needs to be done by a mechanic, why not have them do both? The parts cost is around $40 each IIRC (it's been awhile since I bought one). But I think the shift cable tends to go before the throttle cable does. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |