www.iFourWinns.com • View topic - '03 Freedom 180 ....raise driver's seat?

View unanswered posts | View active topics

Board index » The Lobby » Boating Banter

All times are UTC - 6 hours [ DST ]

'03 Freedom 180 ....raise driver's seat?

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

nuknfuts

Post subject: '03 Freedom 180 ....raise driver's seat?

Posted: Mon Jul 17, 2006 8:05 pm

Tadpole

Joined: Mon Jul 17, 2006 8:00 pm
Posts: 2
Location: Dallas, Texas

Howdy, I'm the proud new owner of the above mentioned boat and only have one complaint. I often find myself sitting on a knee or standing awkwardly trying to see over the windshield....front of the boat...etc.. The driver's seat is connected to a floor mount and I wonder if there is an extension out there for purchase that would increase the height of the seat by about a foot ???

Top

Midlife Crisis

Post subject:

Posted: Mon Jul 17, 2006 8:24 pm

Clownfish

Joined: Thu May 18, 2006 12:42 pm
Posts: 41
Location: Grand Rapids, MI

Don't you have the booster seat where you can slide it back and sit on that? If not perhaps you could call FW and ask them.

_________________
Rex
2005 210H 5.7GXI DP

Top

Hayduke

Post subject:

Posted: Mon Jul 17, 2006 9:18 pm

Minnow

Joined: Sat Jun 17, 2006 12:02 pm
Posts: 15
Location: South Jordan, UT

I also have the same problem. Is it possilbe to add the flip-up bolster to an existing seat? Or would I have to buy a new seat? Would the new one fit on the same mount that the old one is on now?

_________________
1999 Horizon 220 5.7GSi DP
2005 Toyota Tacoma Double Cab TRD Off-Road

Top

Sprint8

Post subject:

Posted: Mon Jul 17, 2006 9:39 pm

Seahorse

Joined: Thu May 18, 2006 7:16 am
Posts: 23
Location: Ontario, Canada

I had the same problem on my Sundowner. I just bought a piece of aluminum tubing the right diameter but longer and replaced it.

Top

jvalich

Post subject:

Posted: Tue Jul 18, 2006 6:01 am

Mental Floss

Joined: Mon May 22, 2006 3:46 pm
Posts: 919
Location: Lakeland, FL

You don't want to call FW about a new seat...major $

Many people use a throwable to sit on

_________________
Jvalich
http://www.badcock.com

'04 FW 288 Vista "Mental Floss"

Top

nuknfuts

Post subject:

Posted: Tue Jul 18, 2006 7:12 pm

Tadpole

Joined: Mon Jul 17, 2006 8:00 pm
Posts: 2
Location: Dallas, Texas

How did the aluminum extension work out? Is it stable? Also, I don't believe I have a booster...

I found all kinds of good stuff here http://www.fourwinns.net/partbook/2003/ ... 180F-AFS03 but nothing that looks like it will work.

Top

Sprint8

Post subject:

Posted: Tue Jul 18, 2006 8:21 pm

Seahorse

Joined: Thu May 18, 2006 7:16 am
Posts: 23
Location: Ontario, Canada

Extension works great. Only problem I had was the original tube was swagged to the base and I had to shim it to make the new one fit tight. You can buy extension tubes and even adjustable tubes for just about any newer boat. My 1988 was an odd ball size so it was easier for me to make it. (and Cheaper)

Top

Post subject:

Posted: Sun Dec 03, 2006 4:53 pm

Shark

Joined: Sat Dec 02, 2006 3:37 pm
Posts: 105
Location: SW Michigan

It would be nice if the seat base was on a hydraulic rise, but when I need to sit higher I just grab a throwable or 'sit' on my knee....................

_________________
Previous Four Winns: 2003 Freedom 180, 150 Johnson XL, purchased new July 2005, sold Sept. 07
Current Four Winns: 2002 Horizon 170, 115 Yamaha V4, purchased May 2010 from family friend.

Top

Page 1 of 1

[ 8 posts ]

Board index » The Lobby » Boating Banter

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum