| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| What is wrong with my C80/DSM/X-ducer? https://www.smwebhead.com/phpBB3/viewtopic.php?f=20&t=5181 |
Page 2 of 2 |
| Author: | bobre [ Thu May 30, 2013 8:54 pm ] |
| Post subject: | Re: What is wrong with my C80/DSM/X-ducer? |
I will post the page that Raymarine sent me with the ohm readings for the transducer, as soon as I figure out how to do so, should not be to hard. |
|
| Author: | jsimon [ Fri May 31, 2013 8:49 am ] |
| Post subject: | Re: What is wrong with my C80/DSM/X-ducer? |
Well unfortunalty I have benn there done that already too. i was getting a faulty reading (very high). there is a good tech paper on it on the raymarine site, just do a search. Its a simple ohm value per tempreture. There are 2 fixes, replace the trandsducerr/thermistor, or you can add a second smaller thermister into the hull and splice into the harness. I opted to replace the existing transducer. The biggest issue for 318 owners, is the placement of it in relation to the starboard engine. I had mine done when the engine was out for my generator nightmare, so it was an easy swap. NOt the case with the engine in. |
|
| Author: | bobre [ Fri May 31, 2013 9:46 am ] |
| Post subject: | Re: What is wrong with my C80/DSM/X-ducer? |
Mine is just to the port side of center in front of the engine, should not be to bad to swap out. |
|
| Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|