Yes and yes, a pain. Don't pull the grommet out till you get a new sending unit. That goes in a small hole in the transom mount that can let water in the boat. What my tech did was to drill a hole in the side of the transom mount so the wiring can be run out the side of the transom mount and then up the transom like a transducer cable. We left the old grommet in the transom mount and cut off the old wires. So now i can change the sender in about 5 min instead of struggling in the bilge jammed between the back of motor and the steering arm where the OE wiring comes out.
_________________ 88 Four Winns 200 Horizon 4.3 OMC Cobra-4bbl 2002 Walker Bay 10/2012 Suzuki 2.5 2008 Walker Bay 8
1998 Jeep Grand Cherokee 4.0/Selectrac 2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II
|