thefinns1 wrote:
I have a 2004 Four Winns 248 Vista and here is the problem. My starter got all wet after hurricane Irma and it wouldn't engage the flywheel (it turned over, but it would not engage the engine to turn IT over). Anyway, I removed the starter and ordered another one. In the meantime....I not longer have any power (12V) anywhere on the boat, except in the red large wire that was connected to the starter motor. There are two smaller (like 4 or 6 gauge) wires that were also connected to the 'HOT' on the starter that are currently not connected. I also have no ignition, that is when I turn the key, there is no beeping to show the teat of the system. Now, in the manual it says that there is a 'ships systems' breaker (main breaker for the whole boat, except the bilge pumps and the ignition) located on the battery switch. Well, I don't see anything there, other than two small push breakers that each go to small 12V items on the battery switch panel. I have checked both batteries (both new last year) and they both read 13.4 volts )plus or minus). I have checked the ignition wire at the ignition switch (the red wire) and it is dead along with the whole dash and the interior of the boat (no lights, fresh water pump, etc). So, what am I doing wrong? Do the two black wires at the starter wire (which DO connect together when the starter is installed) actually power the rest of the 12V and the ignition as well? And, where is the 'ships systems breaker'?
Hopefully someone out there knows the answer.
Thanks,
Russ
My battery switch (2002 vista 268) has the ships system switch on the battery switch plate
Here is a link to a pic of one
https://goo.gl/images/bcQNYP