www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Faria depth gauge https://www.smwebhead.com/phpBB3/viewtopic.php?f=21&t=4143 |
Page 2 of 2 |
Author: | MdRobins35 [ Fri Jul 24, 2009 12:52 pm ] |
Post subject: | Re: Faria depth gauge |
peterman wrote: My depth gauge doesnt seem to be reading the depths correct? Is there a way to reset or recaliberate it? Seems to me it showing a shallow reading. Hi Peterman, I had the same issue with mine for the first couple months that we had the boat. Took it in a few times and they always said it is working correctly. After talking to the mec a couple more times he just said they would replace the sender unit. Ever since then we have had no problems. Might just be a bad unit. Also, he did suggest as well as some have on this forum to try a pretty heavy duty cleaner on the window on the bottom of the boat. Any film will cause an incorrect reading. Good luck! |
Author: | peterman [ Mon Jul 27, 2009 3:30 pm ] |
Post subject: | Re: Faria depth gauge |
Maybe ther was some film on it seem to work O K this weekend!! |
Author: | EvilZ [ Thu Aug 06, 2009 12:06 pm ] |
Post subject: | Re: Faria depth gauge |
Is there actually any way to test a transducer without being in the water? I have the same issue with my Faria transducer and have for the last couple of years. I just use my fishfinder since I am typically looking for bottom contours to try to find good spots for diving, but would like to have the in-dash depth gauge working also. |
Author: | EvilZ [ Thu Sep 10, 2009 4:45 pm ] |
Post subject: | Re: Faria depth gauge |
Anyone? |
Author: | 230 Mike [ Thu Sep 10, 2009 4:59 pm ] |
Post subject: | Re: Faria depth gauge |
I'm pretty sure it depends on contact with water to work properly. |
Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |