Hey all,
Been a while since I posted...probably because I have not used boat since the $800 fuel modual went out in December. Anyway, now I have 2 issues:
1997 Sundowner 225/steel 2-axles trailer w/electric winch:
http://www.dualsport-sd.com/forums/uplo ... _thumb.jpg1) My Four Winns trailer has an electric winch put on at the dealer (no gone) and Four Wins Corp says they never use electric winches...always dealer added= so, no help. My question is how do I wire it? It has a 7-way plug with a spliter to 4-flat right behind it (my truck has the 4-flat), lights all work fine, but when you do this there is a big black wire that charges the battery on the trailer for the winch and acts as bypass if battery dies. Other wise dead electric winch on ramp= bad news.
So, if I go by 7-way plug...what/how do I set up for the charging wire???? Direct to truck battery?? Want to go out this Sat...any advice or anyone have same set up they could look under their truck?
2) Less critical: trim gauge on dash stuck showing full up! Trim operates fine but gauge does not show position.
Thanks all.