www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
2008 Factory tower tube diameter https://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=11079 |
Page 1 of 1 |
Author: | 519soon [ Thu Mar 21, 2013 8:44 pm ] |
Post subject: | 2008 Factory tower tube diameter |
Anyone know what the tube diameter would be on a 2008 factory wakeboard tower? |
Author: | brijr77 [ Thu Mar 28, 2013 9:21 pm ] |
Post subject: | Re: 2008 Factory tower tube diameter |
I believe on my 2008 h220 it's 2.5" |
Author: | Dentguy [ Mon Apr 08, 2013 10:44 pm ] |
Post subject: | Re: 2008 Factory tower tube diameter |
On my 2008 200ss it is 1 7/8... |
Author: | 210 SS [ Wed Apr 10, 2013 5:59 pm ] |
Post subject: | Re: 2008 Factory tower tube diameter |
My 07 210SS is 1 7/8 also. |
Author: | brijr77 [ Wed Apr 10, 2013 6:16 pm ] |
Post subject: | Re: 2008 Factory tower tube diameter |
So am I wrong on my tower size? Or do you guys have a different tower. My boat is an 08 h220 frenzy edition with monster tower. I thought all monster towers were made from 2 1/2 tubing. |
Author: | Dentguy [ Wed Apr 10, 2013 8:34 pm ] |
Post subject: | Re: 2008 Factory tower tube diameter |
My tower is an XTP tower...XTP is now Monster tower..If you go to the XTP website they tell you to go to monster tower website..Our towers look the same..but i notice on yours and some othets that your rear mounts are different..Maybe they changef the design and diameter wen they switched from xtp to monster..i measured mine with a digital caliper and it was 1.875 wich is 1 7/8.. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |