| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Midberth window seal https://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=12398 |
Page 1 of 1 |
| Author: | Justhavenfun [ Fri Oct 04, 2013 7:13 am ] |
| Post subject: | Midberth window seal |
So today is the day I can spend all day to get this midberth window seal, any leads??? I have the window out and have plastic taped over the hole. I have all day today for this. Also two of the latches were loose so I drilled out the rivets holding them in and will re-attach them with some new rivits but add some washers in the inside were the rivets starts to compress and have it tighten on steel instead of wearing on the aluminum window frame. _________________ |
|
| Author: | Justhavenfun [ Fri Oct 04, 2013 7:54 am ] |
| Post subject: | Re: Midberth window seal |
my bad double post, found it. http://greatlakesskipper.com/tracker-49 ... ng-10-foot |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|