www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Looking for 288 Vista steering wheel part https://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=13761 |
Page 1 of 1 |
Author: | JohnScott [ Tue Jan 27, 2015 7:58 pm ] |
Post subject: | Looking for 288 Vista steering wheel part |
The center hub which bolts to the splined steering wheel on our 2006 288 Vista was originally chromed. However, the chrome plating is peeling of and looks bad. I checked on having it re-chromed and the best price is $100...yikes! Wondering if anyone has one from a wheel which was replaced for one reason or another. More specifically, this hub is 3.5" in diameter, has six bolt holes around the circumference and has a Four Winns logo in the center. Thanks for checking out this request. |
Author: | Graham R [ Sat Apr 18, 2015 4:24 pm ] |
Post subject: | Re: Looking for 288 Vista steering wheel part |
Those chrome plated diecast centres are dire; I don't think they looked good even when new. I made a new centre ( fitted with the original centre insert) from 5mm sheets of PC I had lying around using some holesaws/ flapwheels and satin black spray paint. It looks pretty good and is totally resistant to corrosion ! The boat is 100 miles away at the moment, so I can't take/ post pics. |
Author: | JohnScott [ Sat May 02, 2015 7:30 pm ] |
Post subject: | Re: Looking for 288 Vista steering wheel part |
I was able to peel off the remaining chrome, wet sanded the die cast, sprayed it with 2 coats of clear coat auto motive and it looks decent. Thanks for your post. |
Author: | JohnScott [ Sat May 02, 2015 7:31 pm ] |
Post subject: | Re: Looking for 288 Vista steering wheel part |
I was able to peel off the remaining chrome, wet sanded the die cast, sprayed it with 2 coats of clear coat auto motive and it looks decent. Thanks for your post. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |