| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| extended swim platform https://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=138 |
Page 2 of 2 |
| Author: | robbo3 [ Sat May 19, 2007 9:52 am ] |
| Post subject: | |
I agree the photo in the spreadsheet looked terrible. The picture that you posted does a much better job of selling a $2,000 add-on. |
|
| Author: | AlexJ [ Sat May 19, 2007 10:20 am ] |
| Post subject: | |
I have a platform coming in from swimplatforms.com next week. As soon as I get it on, I'll post some pics so that the difference can be noted from the fourwinns "kit". |
|
| Author: | mkivbren [ Sat Jun 02, 2007 8:08 am ] |
| Post subject: | |
How is it suggested to seal the lower supports that attach to the hull? I was going to use the 3M 4200 sealant. The support tube is hollow and is cut out for drainage? on the flange. Do you seal all around the flange or just around the screws allowing for any water accumulation in the support a pathway for drainage? Thanks! |
|
| Author: | AlexJ [ Sat Jun 02, 2007 10:04 pm ] |
| Post subject: | |
I sealed mine where the screws go through the hull and left support holes alone. However I installed a different manufacturer platform. I'd post pics, but haveing a hard time understanding the instructions because it doesn't do what is listed COPY IMAGE something doesn't work. |
|
| Author: | mkivbren [ Sat Jun 02, 2007 11:30 pm ] |
| Post subject: | |
Alex, Just host your pics at photobucket.com then hotlink them here. Edit: Did you use the 4200 sealant? |
|
| Author: | AlexJ [ Sun Jun 03, 2007 8:55 am ] |
| Post subject: | |
I didn't use the 4200, I used the 5200, will need to let dry for a week. I need the time to look at an electrical problem and a water leak. I don't know what hotlink means?? |
|
| Author: | AlexJ [ Sun Jun 03, 2007 9:01 am ] |
| Post subject: | |
|
|
|
| Author: | AlexJ [ Sun Jun 03, 2007 9:11 am ] |
| Post subject: | Lower support pics |
This platform is from swimplatforms.com 
|
|
| Author: | boater50 [ Sat Apr 16, 2011 7:08 am ] |
| Post subject: | Re: extended swim platform |
nice platform! I'm thinking of getting the same one for my 96 238V.......Does the platform cover up the Hull ID #? I can't tell from the swimplatform.com web site if it does.......is there a notch-out on the edge of the ESP that mlunts against the hull where the ID # is??? I would think so... thanks |
|
| Author: | AlexJ [ Sat Apr 16, 2011 10:12 am ] |
| Post subject: | Re: extended swim platform |
No, it doesn't cover it. |
|
| Author: | boater50 [ Sun Apr 17, 2011 10:26 am ] |
| Post subject: | Re: extended swim platform |
thanks!! |
|
| Author: | rolex_26_99 [ Thu May 26, 2011 5:58 pm ] |
| Post subject: | Re: extended swim platform |
Four Winns Fan wrote: Has anyone had any experience with the extended swim platform that can be added from four winns, and how much did you pay? My local dealer quoted me $1700.00 , is it worth it. I get nervous with my kids on what little platform there is, and I don't want to see them or anyone else take a fall onto the outdrive unit. Thanks in advance. We have 3 kids and we love it. Its the best addition you will ever make. |
|
| Author: | nhprinter [ Tue May 31, 2011 8:22 pm ] |
| Post subject: | Re: extended swim platform |
rolex_26_99 wrote: We have 3 kids and we love it. Its the best addition you will ever make. or made..........that post is 5 years old, but hopefully your info can help someone else. 
|
|
| Author: | Kelleyo [ Mon Jun 06, 2011 7:29 am ] |
| Post subject: | Re: extended swim platform |
Old post but I would like to see if anyone has done a platform that can fold up? I want a swim platform but am worried about adding extra length to my boat from a storage perspective... |
|
| Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|