Paul I. wrote:
ric wrote:
You can screw them on with stainless steel screws so they don't corrode.
Though the PVC? Good idea.
Yes. An even better method of attachment is using toggle bolts!
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Attaching registration numbers to an inflatable https://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=13990 |
Page 1 of 2 |
| Author: | JeffLW [ Fri May 08, 2015 8:28 am ] |
| Post subject: | Attaching registration numbers to an inflatable |
Any recommendations for attaching the reg numbers to an inflatable? Anyone try boatnumberplate.com or HypaTac lettering? |
|
| Author: | Vintage Beauty [ Fri May 08, 2015 8:37 am ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
My father in law made teak boards that were attached to his dingy via velcro straps. He mounted vinyl letters and the registration to the teak boards. |
|
| Author: | rpengr [ Fri May 08, 2015 10:02 am ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
JeffLW wrote: Any recommendations for attaching the reg numbers to an inflatable? Anyone try boatnumberplate.com or HypaTac lettering? Never tried them, but curiosity made me look up that http://www.boatnumberplate.com Looks like a good system: They have instructions for PVC boats: http://j.b5z.net/i/u/2161213/i/bnp_install_instruct_PVC.htm and also for Hypalon Boats: http://j.b5z.net/i/u/2161213/i/Hypalon.htm |
|
| Author: | Paul I. [ Fri May 08, 2015 11:47 am ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
I traced out the numbers and used a marker. It was a lot easier. |
|
| Author: | ric [ Fri May 08, 2015 11:57 am ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
You can screw them on with stainless steel screws so they don't corrode. |
|
| Author: | Paul I. [ Fri May 08, 2015 12:04 pm ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
ric wrote: You can screw them on with stainless steel screws so they don't corrode. Though the PVC? Good idea. |
|
| Author: | babbot1 [ Fri May 08, 2015 12:21 pm ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
I have tried stenciling the numbers. Its a pain and comes out terrible so I bought this on my latest inflatable and it looks 100% better. You buy this kit and it basically gives you an access code where you go online and create your "plate" They ship it out to you with the numbers on it and you glue it on. Easy... except gluing is an art, I need to touch mine up. the edges didn't get enough glue. You can choose different colors and for Hypalon or PVC. http://www.defender.com/product3.jsp?path=-1|215570|294|2345884|2345885&id=2256838 |
|
| Author: | firecadet613 [ Fri May 08, 2015 1:41 pm ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
BoatNumberPlate is on after 3 years. |
|
| Author: | ric [ Fri May 08, 2015 3:30 pm ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
Paul I. wrote: ric wrote: You can screw them on with stainless steel screws so they don't corrode. Though the PVC? Good idea. Yes. An even better method of attachment is using toggle bolts!
|
|
| Author: | rpengr [ Sat May 09, 2015 10:26 am ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
|
|
| Author: | JeffLW [ Sun May 10, 2015 7:52 pm ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
ric wrote: Paul I. wrote: ric wrote: You can screw them on with stainless steel screws so they don't corrode. Though the PVC? Good idea. Yes. An even better method of attachment is using toggle bolts! I was thinking something more like this. Easier to remove if I sell it.  
|
|
| Author: | JeffLW [ Sun May 10, 2015 7:56 pm ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
firecadet613 wrote: BoatNumberPlate is on after 3 years. Thanks Fire. That looked like the best option to me. |
|
| Author: | ric [ Sun May 10, 2015 10:14 pm ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
Oh that's a great idea. Just fill the holes with toothpaste it works just like spackle. |
|
| Author: | Technologic80 [ Wed May 13, 2015 2:37 pm ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
I have used boatnumberplate for my last two inflatables and LOVE IT!! Up in my area, West Marine does not carry nor do they advocate using any kind of "plate" that hangs off - the law is clear that the registration numbers have to be permanently attached, and having a plate that flops off the side attached by hooks or pieces of line, are quickly removable, and thus not meeting the legal requirements. So they dont even sell that kind of stuff. |
|
| Author: | JeffLW [ Thu May 14, 2015 3:07 pm ] |
| Post subject: | Re: Attaching registration numbers to an inflatable |
Technologic80 wrote: I have used boatnumberplate for my last two inflatables and LOVE IT!! Up in my area, West Marine does not carry nor do they advocate using any kind of "plate" that hangs off - the law is clear that the registration numbers have to be permanently attached, and having a plate that flops off the side attached by hooks or pieces of line, are quickly removable, and thus not meeting the legal requirements. So they dont even sell that kind of stuff. Yeah I noticed the "permanently" part of the rules as well. I would just stencil them on with paint but I want something that looks a little better than that. Got my MC numbers for the dink today, so I'll be ordering boatnumberplate tonight. |
|
| Page 1 of 2 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|