www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Thu Mar 28, 2024 1:01 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
PostPosted: Tue Sep 08, 2015 6:43 am 
Offline
email admin your custom rank
User avatar

Joined: Mon Oct 27, 2008 7:13 pm
Posts: 1303
Location: Allatoona Lake, Georgia
I own a 2000 298 Vista and recently had the stripes and registration numbers removed before having it compounded and waxed. I want all new graphics (including the name) and I just received this $789 quote and I want to know if you think this is insane like I do?

Quote:
Good evening. Below is the estimate you requested. We will need your credit card number to secure the order and send you layouts.

30' long x 1" thick black (top) and silver (bottom) stripes for both sides with 1/4" space in between = $420.00 plus tax

"JuJu" for transom in black and silver = $96.00 plus tax (in cursive)

boat registration numbers in black and silver = $24.00 each plus tax

3 hours of installation by Friday = $225.00

Thanks,

Bryan


Plan B is to go the DIY route with no stripes for now and then put them on later in the spring (I own the trailer so no cost to pull my boat out). Any references for a place that will print my registration and name graphics? Has anyone gone with no stripes because it really doesn't look too bad?
Image

_________________
Image
Current Boat: 2000 Four Winns 298 Vista
Previous Boat: 2000 Carver 406MY


Top
 Profile  
 
PostPosted: Tue Sep 08, 2015 8:12 am 
Offline
email admin your custom rank
User avatar

Joined: Thu Apr 04, 2013 6:28 am
Posts: 1839
Location: South Carolina, USA
the Hull registration numbers on the bow custom cut shout be about $15-30 I paid $17 for mine.. transom Name should be around $50-100 depending who installs. Strips should be around 150-200. I for sure would get more than that one quote as it seems very high. i would say materials and labor you should be in the 350 area.

_________________
Not Penny's Boat
Image
1993 190 Horizon 5.0L EFI
http://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=11136
1977 14' CMF Skiff SOLD
2015 Emotion Stealth Angler 11


Top
 Profile  
 
PostPosted: Tue Sep 08, 2015 9:33 am 
Offline
email admin your custom rank
User avatar

Joined: Mon Oct 27, 2008 7:13 pm
Posts: 1303
Location: Allatoona Lake, Georgia
Jdpber wrote:
i would say materials and labor you should be in the 350 area.


That is what I was anticipating, $300 to $400. When I first bought the boat, the registration and name ran around $200 but the person had to drive from another lake and I am sure there had to be a trip fee in there. I can't find anyone that does this type work anymore and the guy that quoted me is just a sign company and doesn't even advertise boats. I guess it is all DIY now. Thanks.

_________________
Image
Current Boat: 2000 Four Winns 298 Vista
Previous Boat: 2000 Carver 406MY


Top
 Profile  
 
PostPosted: Tue Sep 08, 2015 9:43 am 
Offline
email admin your custom rank

Joined: Sun May 20, 2012 8:22 pm
Posts: 274
Location: New Carlisle, Ohio
30' long x 1" thick black (top) and silver (bottom) stripes for both sides with 1/4" space in between = $420.00 plus tax
30 foot long? That's gonna add up!

_________________
1990 Four Winns Horizon 200
2005 GMC Sierra


Top
 Profile  
 
PostPosted: Tue Sep 08, 2015 9:58 am 
Offline
email admin your custom rank

Joined: Tue Jan 18, 2011 8:45 pm
Posts: 333
Time to learn how to do these things yourself.
Figure the labor rate around $100.00hr with a min


Top
 Profile  
 
PostPosted: Tue Sep 08, 2015 10:09 am 
Offline
email admin your custom rank

Joined: Thu Jul 13, 2006 7:45 pm
Posts: 2866
Location: Indiana
Have you checked eBay or with Four Winns on the 30' stripe tape? They should have it available, for much cheaper! The name ran me about $50 and install is a breeze.

_________________
2007 358 T-5.7GXi IB
Previous Boats
'08 H240, '08 V318, '04 268, '04 225


Top
 Profile  
 
PostPosted: Tue Sep 08, 2015 12:08 pm 
Offline
email admin your custom rank
User avatar

Joined: Sat Jul 21, 2012 12:44 am
Posts: 733
Location: Las Vegas, NV
I did a custom name and registration numbers with http://www.vinyldisorder.com/

Cost me about $50 shipped

_________________
Image

Chris and Alicia
Las Vegas, NV
ALTIVA
1996 Four Winns 238 Vista Dlx 5.8Fi


Top
 Profile  
 
PostPosted: Tue Sep 08, 2015 4:40 pm 
Offline
email admin your custom rank
User avatar

Joined: Mon Oct 27, 2008 7:13 pm
Posts: 1303
Location: Allatoona Lake, Georgia
firecadet613 wrote:
Have you checked eBay or with Four Winns on the 30' stripe tape? They should have it available, for much cheaper! The name ran me about $50 and install is a breeze.


I couldn't find stripe tape on the Four Winns' site but I need to check later years. Thanks.

_________________
Image
Current Boat: 2000 Four Winns 298 Vista
Previous Boat: 2000 Carver 406MY


Top
 Profile  
 
PostPosted: Tue Sep 08, 2015 4:44 pm 
Offline
email admin your custom rank
User avatar

Joined: Mon Oct 27, 2008 7:13 pm
Posts: 1303
Location: Allatoona Lake, Georgia
LVChris wrote:
I did a custom name and registration numbers with http://www.vinyldisorder.com/

Cost me about $50 shipped


Thanks for the link and they definitely deal with boats and are cheap.

_________________
Image
Current Boat: 2000 Four Winns 298 Vista
Previous Boat: 2000 Carver 406MY


Top
 Profile  
 
PostPosted: Tue Sep 08, 2015 5:43 pm 
Offline
email admin your custom rank

Joined: Tue Jan 18, 2011 8:45 pm
Posts: 333
Find a store in your area that deals in exclusively automotive paint supplies. They should carry a variety of 3M tape rolls in diff colors and lengths


Top
 Profile  
 
PostPosted: Thu Sep 10, 2015 6:47 pm 
Offline
Whatever
User avatar

Joined: Sun Aug 12, 2007 8:39 am
Posts: 996
Location: Salt Lake, Utah
I cut my own vinyl stickers and graphics. Depending on what material someone buys and labor, $700-800 would not be out of line if it is the good stuff. Also, did this guy have to buy 100' x 12" wide to make your stripe??? If so, that could have been a chunk of his expenses.

Now, for thin, cheap vinyl with little to no UV protection, sure they can be had for much less $$$$.

I invested in software, a cutter and took time to learn to do it myself. But I enjoy doing all these projects on the boat myself.

_________________
2000 248 5.7L DP
'92, '94 SXI 750, '08 STX 15F, '12 Ultra LX 300
Videos


Top
 Profile  
 
PostPosted: Sun Sep 13, 2015 5:23 am 
Offline
email admin your custom rank
User avatar

Joined: Mon Oct 27, 2008 7:13 pm
Posts: 1303
Location: Allatoona Lake, Georgia
I just received a quote from a guy that has done work for many members on http://www.thehulltruth.com so you know he does good work. :lol: $185 for registration, name and stripes. I have to install everything but people do it all the time and I can easily follow the old stripe lines where the gelcoat faded. Should I be concerned about the stripes being in 15' sections?

Quote:
Here is what I have come up with on your lettering/stripes:

Registration numbers: $35
Boat Name : $60
Striping : $45 for Black and $45 for gray

That comes to a total of $185. I obviously would have to ship them to you and they would be shipped via a tube. I usually collect $7 for shipping. The registration numbers and the boat name will come with a clear application tape for you to easily apply to the boat. The striping will not have application tape applied to them. I will have them cut in the 15' sections as we discussed. So there will be two black 15' sections for each port and starboard side and the same with the gray. I do want to mention I do not have a "silver" as you mentioned. I have a gray that obviously looks silver. If you are ok with the above quote and the colors let me know. I will do a sample for the boat name to be sure the font selection is acceptable.

JWPGA
__________________
Morehead City, NC


http://www.thehulltruth.com/carolinas/5 ... mbers.html

_________________
Image
Current Boat: 2000 Four Winns 298 Vista
Previous Boat: 2000 Carver 406MY


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group