www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
88 Four Winns Canida 200 Engine Hatch Dampers: where? https://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=7479 |
Page 1 of 1 |
Author: | jigeye [ Sun May 15, 2011 3:00 pm ] |
Post subject: | 88 Four Winns Canida 200 Engine Hatch Dampers: where? |
Need a new engine hatch damper. There are two of them on each end of the big area where you can lift to get to the engine. Part # off old one is P68-00556/3. Anyone know where I can find one? |
Author: | LouC [ Mon May 16, 2011 12:52 am ] |
Post subject: | Re: 88 Four Winns Canida 200 Engine Hatch Dampers: where? |
I got a set from West Marine for my 88, I forget the size but I measured the old ones and used 60 lbs units... |
Author: | jigeye [ Mon May 16, 2011 6:17 am ] |
Post subject: | Re: 88 Four Winns Canida 200 Engine Hatch Dampers: where? |
thanks |
Author: | jigeye [ Mon May 16, 2011 6:31 am ] |
Post subject: | Re: 88 Four Winns Canida 200 Engine Hatch Dampers: where? |
there are many choices for the 60 lb struts. Do you remember the travel length? |
Author: | Cap'n Morgan [ Mon May 16, 2011 7:07 am ] |
Post subject: | Re: 88 Four Winns Canida 200 Engine Hatch Dampers: where? |
jigeye wrote: there are many choices for the 60 lb struts. Do you remember the travel length? Measure what you have on you boat. Lou C has a different boat and configuration than you do. It's unlikely his struts are the same LOA as yours are. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |