www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Bimini Boot Cover
https://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=7499		 Page 1 of 1
Author:  StirCrazy [ Tue May 17, 2011 6:26 pm ]
Post subject:  Bimini Boot Cover
Looking for a canvas Bimini boot cover for a 298 Vista (2000 model year). I have the same folding setup as 298Vista2000's photo below:

Image

I would like to get this setup if possible, but when looking up part numbers on Four Winns, I had confusing part numbers come up. Here's what was shown:

First, this one came up, but in the picture it shows two boot covers? It says the part is valid for 298's built from 12/1/1998 thru today. What I see is that they aren't all wrapped in one boot like on 298Vista's. The part number is 140-50280 Canvas, Tie Up Boot 298V/328V

Image

Underneath this was a part numbered 140-50303 Canvas, Bimini Boot 298V. This one did not have an accompanying photo with it.

I'm stuck on which one I should be looking for, or order. Also, if anyone has one for sale I would be very interested. It looks really sharp with the embroidered logo like on 298Vista's and I'd love one like that.

Any help/suggestions would be appreciated.
Author:  Bob2135 [ Sat May 21, 2011 11:02 am ]
Post subject:  Re: Bimini Boot Cover
StirCrazy,
The best thing we did was have our local canvas/marine fabric shop make custom boots for our tops. This insured we got one that fit well, the zippers were reinforced, and got the color match right. Then...I sent my boat name (grapic) and a Four Winns logo picture to my local embroidery shop, and had them digitize both items, then had the boots done up. Liked them so well, then had towels done for the boat, a Admirals T-Shirt and cap, and same for the captain. Now our embroidery shop had the images saved, and when I need to update or replace, i just call them.
Bob
Author:  StirCrazy [ Sun May 22, 2011 9:17 pm ]
Post subject:  Re: Bimini Boot Cover
Thanks Bob, I think I'm going to look into that route. There are a few canvas shops real close to us and I need to get one to come out and do just that. I appreciate the response.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/