somehow i forgot to make one of the captain seat bottoms, so i made this one last night. Tonight I will stretch and finish fit it. Finish the last 2 seams of a headrest and start on the bottom of the rear bench. Rapidly closing this chapter.
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| '93 190 Horizon. 20 year revival (Pic heavy) https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=11136 |
Page 44 of 46 |
| Author: | zims1993 [ Mon May 08, 2017 11:29 am ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
That's a different plug then I used. Cross referenced the plugs that are on the ECU cover, Motorcraft ASF-32C or champion RV8C and come up with NGK TR5 - 2238 number. The 6945 you listed is Motorcraft equivalent ASF42C which I believe is a heat range hotter. |
|
| Author: | Jdpber [ Wed May 10, 2017 9:24 am ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
somehow i forgot to make one of the captain seat bottoms, so i made this one last night. Tonight I will stretch and finish fit it. Finish the last 2 seams of a headrest and start on the bottom of the rear bench. Rapidly closing this chapter.
|
|
| Author: | Jdpber [ Thu May 11, 2017 11:17 am ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
seat bottom done and ready for install 
|
|
| Author: | Jdpber [ Mon May 15, 2017 12:13 pm ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
UPS came! CVF Aluminum V Belt Alt+Power Steer bracket and pulley setup. alternator fan.  crank pulley  the rest of the pulleys and brackets 
|
|
| Author: | rpengr [ Mon May 15, 2017 2:14 pm ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
Nice looking Pulley and Fan. Are they Clear Anodized? That would keep them looking good. |
|
| Author: | Jdpber [ Wed May 17, 2017 8:17 am ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
Ok so after waiting a week and change for the ZIPPER to finish round 2 of the rear back rest, I got her done late last night after dark. SO this morning I slipped her into the track for a finish fit and some pics for yall before the bottom snaps are installed. along the rear seam is a hard rubber piping that slides into a C channel to hold the cushion in place. It also will allow for easy removal.    The New Hinges for the rear bench bottom finally arrived also. I had a change of plans and style so new different standard 180 hinges were ordered in lue of the original idea of a front fliping double offset hinge. So this is Item 1 on todays list. Final measurements and placement, holes and hardware, then sew the butt padd material and stretch it.  
|
|
| Author: | BrentC5Z [ Wed May 17, 2017 9:27 am ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
Breitling? |
|
| Author: | Jdpber [ Wed May 17, 2017 9:32 am ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
BrentC5Z wrote: Breitling? sadly no! |
|
| Author: | Jdpber [ Thu May 18, 2017 8:14 am ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
last night progress: drill seat hinge holes, Stainless nut insets installed, Re did one head rest because i was not happy, Backing attachment for the seat back inserts, Bottoms permanently attached, bottom trim installed, materials cut for the big seat bottom. Tonight the bench bottom will be made. 
|
|
| Author: | rgoals2win [ Fri May 19, 2017 1:42 am ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
Jdpber wrote: last night progress... Tonight the bench bottom will be made. Wow, those are nice. Just really impressed. - Bob |
|
| Author: | chris268 [ Fri May 19, 2017 4:28 am ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
Beautiful! |
|
| Author: | Jdpber [ Fri May 19, 2017 8:03 am ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
thanks all. yea tonight i have a few more stitches to do on the seat bottom. Last night got busy with family and shop time took a hit. But be ready as i am prepared to wash and clean the interior saturday morning for some arial photos of it all together this weekend. |
|
| Author: | Jdpber [ Mon May 22, 2017 9:14 am ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
Ok here are the first stage finished pictures. I still have to clean the floors and deck will get scrubbed and sealed along with the entire boat. SO yes I know they are dirty, no need to bring them up! But the seats are all in! The replacement (CORRECT pulley for the Power steering arrived Sat) But it rained crazy once i was back home and all day Sunday so motor work happens tonight. I only had a brief window of no rain to take these pics on sunday.        
|
|
| Author: | Jdpber [ Mon Jun 05, 2017 12:39 pm ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
UPDATE 6/5/2017: ok so the CVF pulley setup was a BUST. it moved my Power Steering pump into the lift fuel pump and my water separator filter setup. Also it made the hard lines stretched too far well farther than i wanted. Long story short each time i relocated or offset to align the belts i had to move something else and simply too many things were issues. SO they were returned. After hunting i finally ordered multiple pulleys from Summit and measured them and found one that worked perfect, returning the rest. Made a StarBoard mount with a set of SS T-bolt clamps and thru bolted it into the engine bay for my Automatic extinguisher 7#. (Yes i have clipped the zip ties and awaiting SS clamps)    
|
|
| Author: | zims1993 [ Mon Jun 05, 2017 2:14 pm ] |
| Post subject: | Re: '93 190 Horizon. 20 year revival (Pic heavy) |
When I get my boat back from the canvas shop I'll look at the pulley setup a little more, I thought the set I found matched better then the one you purchased. |
|
| Page 44 of 46 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|