www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Replacing the OEM Speedometer Paddlewheel 1999 180LS https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=23787 |
Page 1 of 1 |
Author: | wsk2715 [ Mon Jul 11, 2022 8:31 pm ] |
Post subject: | Replacing the OEM Speedometer Paddlewheel 1999 180LS |
I have a 1999 Four Winns 180LS. It has the original paddle wheel sensor which has failed. I cannot find the OEM part for the Speedometer paddle wheel kit or a replacement part. It is unique to Four Winns made by Airmar for a VDO Gauge cluster. Would this be the part? I have a three-wire connector but do not measure water temp https://www.greatlakesskipper.com/airma ... ab25844075 Four Winns has no part information. Hull Number FWNMEC45F999 Much appreciated Bill K |
Author: | LouC [ Tue Jul 12, 2022 12:04 pm ] |
Post subject: | Re: Replacing the OEM Speedometer Paddlewheel 1999 180LS |
Find out which company made the gauges and ask them… |
Author: | wsk2715 [ Fri Jul 15, 2022 5:02 pm ] |
Post subject: | Re: Replacing the OEM Speedometer Paddlewheel 1999 180LS |
VDO which is the issue.No longer supporting this. |
Author: | LouC [ Thu Jul 21, 2022 8:38 am ] |
Post subject: | Re: Replacing the OEM Speedometer Paddlewheel 1999 180LS |
If this is the seperate gauge set up see if you can get a matching speedo and just install an air pressure set up with the pick up on transom and the water tube that goes up front, or even easier, just get a GPS speedo. I know that VDO made seperate gauges and also that unit that looked like an 80s Mustang gauge cluster with the integral gauges. Which one do you have? |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |