www.iFourWinns.com • View topic - Pop-Up Cleat Upgrade

View unanswered posts | View active topics

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Pop-Up Cleat Upgrade

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

Barefoot

Post subject: Pop-Up Cleat Upgrade

Posted: Mon Feb 19, 2007 12:11 pm

Clownfish

Joined: Wed May 17, 2006 8:19 pm
Posts: 40
Location: California

I would like to replace the cleats on my 1999 200 Horizon to the flush mounted pop-up style. My concern is they won't sit flush on some of the curved surfaces. Has anyone done this or have any advise?

Ross

_________________
1999 200 Horizon

Top

230 Mike

Post subject:

Posted: Mon Feb 19, 2007 5:57 pm

230 Mike

Joined: Mon May 15, 2006 7:59 pm
Posts: 5141
Location: Kansas City, Table Rock Lake

On the newer Horizons, where the pop-up cleats are mounted on curved surfaces there's a cleat-shaped flat area molded into the deck - which suggests that your concern is well founded.

_________________

Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic

Top

Barefoot

Post subject:

Posted: Sun Mar 04, 2007 1:19 pm

Clownfish

Joined: Wed May 17, 2006 8:19 pm
Posts: 40
Location: California

Thanks for the reply Mike, I've seen the cut-outs you are talking about, a very clean look. I was hoping to find some that have a bezel that is curved to match the curves of the boat, but no luck so far. Anyone else?

Ross

_________________
1999 200 Horizon

Top

Page 1 of 1

[ 3 posts ]

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 60 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum