www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sat Apr 27, 2024 11:34 am

View unanswered posts | View active topics


Board index » Four Winns Models » Funship

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
peterman
PostPosted: Mon Jul 27, 2009 9:20 am 
Offline
Starfish

Joined: Wed Sep 12, 2007 2:00 pm
Posts: 55
My walkthrough removable cushion doesnt seem to fit right? I finally took off the metal clip on the bottom of the cushion so I could get it to fit in place. Maybe the manufacturer didn't put that clip in the right place, not a big deal at all. Anybody else have this happen?

_________________
Tony

2008 FS 5.7ltr 300HP DP
2007 Yukon Denali
2008 Chevrolet Avalanche LTZ
1995 Polaris 650
Top
 Profile  
 
EvilZ
PostPosted: Mon Aug 03, 2009 4:42 pm 
Offline
email admin your custom rank

Joined: Tue Jun 26, 2007 10:46 pm
Posts: 1146
Location: San Diego, CA
Mine works with a little manipulation.

_________________
2002 Funship 214
VP 5.7 GX Si
2003 Tahoe
Top
 Profile  
 
4WinnsRob
PostPosted: Tue Aug 04, 2009 8:28 pm 
Offline
Minnow

Joined: Mon May 11, 2009 7:43 pm
Posts: 17
Location: Colonie NY
Mine is a little snug too. I find it fits better if you remove the cushion on left first install walkthough cushion then put back cushion on left.

_________________
2010 F224 Volvo Penta 5.0 GXi/DP
Top
 Profile  
 
EvilZ
PostPosted: Wed Aug 05, 2009 11:40 am 
Offline
email admin your custom rank

Joined: Tue Jun 26, 2007 10:46 pm
Posts: 1146
Location: San Diego, CA
4WinnsRob wrote:
Mine is a little snug too. I find it fits better if you remove the cushion on left first install walkthough cushion then put back cushion on left.


+1 - good advice.

_________________
2002 Funship 214
VP 5.7 GX Si
2003 Tahoe
Top
 Profile  
 
Baldo
PostPosted: Tue Jul 05, 2011 9:08 am 
Offline
Seahorse

Joined: Thu Jun 09, 2011 7:27 am
Posts: 20
Location: Southern Minnesota
Same area, different cushion. My cushion at the walk through that goes in vertically does not seem to fit well at all. It goes into the tracks really tight and does not want to go all the way down. This results in the vertical cushion sticking up above the back cushions on either side of it. I have an F204. Any thoughts?

_________________
2009 F204 with 5.0 litre Volvo
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » Four Winns Models » Funship

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 21 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group