www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Bimini Top Parts
https://www.smwebhead.com/phpBB3/viewtopic.php?f=5&t=9842		 Page 1 of 1
Author:  NiagaraChillin [ Mon Jul 16, 2012 12:03 pm ]
Post subject:  Bimini Top Parts
Looking for a replacement piece for my bimini top. The plastic cradle pieces that are screwed to the top of the side windows are broken and will not hold the main strut of my bimini top. I checked the main Four Winns site and they only have actual bimini tops (struts, canvas, etc), not the cradles. Would actually like to replace the plastic with something more substantial. Anyone know of a manufacturer that makes em in steel and/or where to get them??
Author:  97_245_sd [ Tue Jul 17, 2012 3:26 pm ]
Post subject:  Re: Bimini Top Parts
Are you referring to the little clip that is half-round on the windshield frame, the bimini pole has a round clip that snaps into it? I couldn't find one either. Converted to a different mount, a tab with a hole on the pole end. The windshield mount has a threaded hole that a screw goes through the pole end and secures it that way.
Author:  Cap'n Morgan [ Tue Jul 17, 2012 4:41 pm ]
Post subject:  Re: Bimini Top Parts
I would take a look here, they have a ton of Bimini parts at good prices.

http://www.marinepartdepot.com/newststdehi.html
Author:  NiagaraChillin [ Tue Jul 17, 2012 8:08 pm ]
Post subject:  Re: Bimini Top Parts
Yep thats the part, made of plastic and both are broken. Thanks for the link Cap'n....thinking about getting these:

Image Image
Author:  MegaCabMan [ Wed Jul 18, 2012 10:14 am ]
Post subject:  Re: Bimini Top Parts
NiagaraChillin wrote:
Yep thats the part, made of plastic and both are broken. Thanks for the link Cap'n....thinking about getting these:

Image Image


That's the part that comes on the tops now. No problems with mine other than the cable that hold the pin is not stainless and rusts
Author:  jprest [ Sat Jan 05, 2013 10:55 am ]
Post subject:  Re: Bimini Top Parts
I have a 245 Sundowner 1998 . I sent a Picture to Fourwinns and they provided part# and I was able to get them from the local dealer in Coldwater Ont . Anything else let me know
Author:  greg5891 [ Tue Jan 08, 2013 6:54 pm ]
Post subject:  Re: Bimini Top Parts
I brought mine to a machine shop and had them made in aluminum... the other ones just broke,garbage!!!!Plastic to metal, great idea!!!!
Author:  newbiechris [ Sun Oct 12, 2014 12:40 pm ]
Post subject:  Re: Bimini Top Parts
I'm looking for these and having a very hard time finding them. I did find some but they were not the same size. Can someone post a picture of what they used or where I can find them. Thanks

Image
Author:  NiagaraChillin [ Tue Oct 14, 2014 12:17 am ]
Post subject:  Re: Bimini Top Parts
newbiechris wrote:
I'm looking for these and having a very hard time finding them. I did find some but they were not the same size. Can someone post a picture of what they used or where I can find them. Thanks

I acquired the needed pieces and posted the install here on this thread, scroll down for pics and the webpage link: http://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=12966&start=75
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/