www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Tue May 14, 2024 6:03 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Wed Sep 12, 2007 7:23 am 
Offline
Whatever
User avatar

Joined: Sun Aug 12, 2007 8:39 am
Posts: 996
Location: Salt Lake, Utah
My speedo is not working, wondering if this is a common problem or not and what to look for. I know the paddle wheel is more reliable vs. the pressure type.

I have done a search and can only find info on the pressure type, fixing plugged tube, ect...

Has anyone else had issues with the paddle wheel style?

_________________
2000 248 5.7L DP
'92, '94 SXI 750, '08 STX 15F, '12 Ultra LX 300
Videos


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 12, 2007 3:05 pm 
Offline
email admin your custom rank

Joined: Thu May 18, 2006 12:31 pm
Posts: 2108
Location: Chester, UK
My previous boat ('99 225 Sundowner) had the VDO dash/ paddle wheel sender. It was very accurate (much more accurate than my current boat's pitot tube type speedometer). It only ever gave a problem when the paddle wheel became blocked with barnacles. Is your boat permanently in the water or on a trailer? If in the water, worth checking for obstructions. Also the connector blocks, continuity of wires in the harness etc. The VDO website actually indicates the sender type, from memory it was an "Airmar", I never looked to see if they give troubleshooting advice as it never gave problems, worth a look there maybe. The sender is sealed and not serviceable.

Regards,

Graham


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 12, 2007 9:58 pm 
Offline
email admin your custom rank

Joined: Fri May 26, 2006 8:06 pm
Posts: 225
Location: N.E. OHIO
I have replaced mine and it stopped working again. Never did work right. I cut the wire and get along with out a speedo. I boat on a river with a lot of debries and the paddle wheel takes a beating.

_________________
Inboard, outboard, onboard never bored
Image KUT 'N LOOSE
'99 258 VISTA


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 13, 2007 8:10 am 
Offline
Whatever
User avatar

Joined: Sun Aug 12, 2007 8:39 am
Posts: 996
Location: Salt Lake, Utah
Thanks for the replys, I will search the VDO site.

The boat is now on a trailer in my backyard, but the prior owner had it in a slip for a year or two. I have cleaned everything, all that is left to do is check continuity and most likely replace.

_________________
2000 248 5.7L DP
'92, '94 SXI 750, '08 STX 15F, '12 Ultra LX 300
Videos


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 13, 2007 1:04 pm 
Offline
email admin your custom rank

Joined: Thu May 18, 2006 12:31 pm
Posts: 2108
Location: Chester, UK
re the site covering the VDO instrument cluster, this is the web site with the technical bulletins; not as easy to find since they became Siemens VDO!

http://usa.siemensvdo.com/NR/exeres/96E ... 503C2E.htm

There is quite a lot of info there, including how to test the sender

Regards,

Graham


Top
 Profile  
 
 Post subject:
PostPosted: Sun Sep 16, 2007 6:24 pm 
Offline
Whatever
User avatar

Joined: Sun Aug 12, 2007 8:39 am
Posts: 996
Location: Salt Lake, Utah
Graham,

Thanks for the link, I tested and found the transducer to be bad. Now a search for replacement parts!!

Thanks again for your help.

_________________
2000 248 5.7L DP
'92, '94 SXI 750, '08 STX 15F, '12 Ultra LX 300
Videos


Top
 Profile  
 
 Post subject:
PostPosted: Mon Sep 17, 2007 8:51 pm 
Offline
Whatever
User avatar

Joined: Sun Aug 12, 2007 8:39 am
Posts: 996
Location: Salt Lake, Utah
Got the new transducer installed, speedo back in buisness!!!

_________________
2000 248 5.7L DP
'92, '94 SXI 750, '08 STX 15F, '12 Ultra LX 300
Videos


Top
 Profile  
 
 Post subject:
PostPosted: Mon Sep 24, 2007 10:25 am 
Offline
email admin your custom rank

Joined: Fri May 26, 2006 3:18 pm
Posts: 642
Location: Lake St. Clair, Michigan
Ive replaced my paddle wheel on my 258 Vista once earlier this spring and its bad already. :evil:
I rely on my Chartplotter for speed, which sucks because the speedo should be more reliable than that!

_________________
1997 Four Winns Vista 278
T - 4.3l EFI
Kohler 4esz Genset
379 hours as of 8/8/21


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 50 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group