www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

288 Vista Cabin Door
https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=143
Page 1 of 1

Author:  jljgej [ Tue Jun 20, 2006 7:03 pm ]
Post subject:  288 Vista Cabin Door

Has anyone had trouble opening the cabin door? I can only open the door about 2 inches before it stops. It appears to be a problem with the top rail of the door. The bottom of the door doesn't appear to be where the door stops.

Thanks

Author:  jvalich [ Tue Jun 20, 2006 10:34 pm ]
Post subject: 

Yes, and it was fixed. FW did a bit of a design flaw, no access is possible for the top rail of the door.

What happened with ours is the screw that holds the nylon block that runs thru the track came loose. There is no way to get at the top of the screw to tighten it. You would have to lift the door a touch to get it to slide properly.

What they did was to cut a hole in the fiberglass to be able to access the screw. They fixed it so it would never come loose again. They then had a fiberglass repair guy come in and repair the hole.

Big repair $ for FW for a $.05 screw.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/