| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 2002 Vista 248 Bilge Pump Replace access question https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=15620 |
Page 1 of 1 |
| Author: | John1290r [ Sun Jul 23, 2017 1:55 am ] |
| Post subject: | 2002 Vista 248 Bilge Pump Replace access question |
Hello there. Awesome forum! Well I found out that my bilge pump under the engine broke the plastic outlet pipe off the pump housing and although it works electrically the hose is no longer connected. Climbing down into the engine I may just be too big to do this.. Has anyone successfully changed the pump without pulling the engine? Or does anyone have any tips? A tiny mechanic might be my only option. Thanks! |
|
| Author: | jfair [ Sun Jul 23, 2017 8:49 am ] |
| Post subject: | Re: 2002 Vista 248 Bilge Pump Replace access question |
I am not familiar with your model but there are a couple of ideas which might help. My mechanic tells me it is common practice to buy a new bilge pump, attach the electrical wires and the outlet hose and then push it towards the old unit and cable tie the new unit to the original. In one case, entirely different kind of boat, I attempted to reach the old bilge pump and failed. I screwed down a new pump to a piece of seaboard. I then took a length of aluminum tube and flattened one end. The flattened end was screwed down to the seaboard. The pump on its seaboard platform is pushed in to place and the aluminum is bent so that the other end can be fixed to the hull in a suitable place. Neither idea is perfect but more fun than lifting the engine. |
|
| Author: | jtkey [ Sun Jul 23, 2017 1:48 pm ] |
| Post subject: | Re: 2002 Vista 248 Bilge Pump Replace access question |
I'm a pretty big dude, too, and think I would have been able to change the pump on my '01 248. Not without pain and incredible discomfort, but I was at least able to get a finger down there to test the float each spring. That said, sometimes it's worth the hour of labor (plus parts) to not have to climb into the bilge. It shouldn't be any more than that. |
|
| Author: | Rick2752 [ Sun Jul 23, 2017 8:03 pm ] |
| Post subject: | Re: 2002 Vista 248 Bilge Pump Replace access question |
It can definitely be done I've changed my 01 248 also. If you are changing it go bigger. It's not a fun job but I've also done worse. |
|
| Author: | John1290r [ Sun Jul 23, 2017 9:07 pm ] |
| Post subject: | Re: 2002 Vista 248 Bilge Pump Replace access question |
Thank you guys for the replies. I'll get on it and get it done. Rick, what size did you install? |
|
| Author: | Rick2752 [ Mon Jul 24, 2017 12:18 pm ] |
| Post subject: | Re: 2002 Vista 248 Bilge Pump Replace access question |
I think I put in a 2200 gpm. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|