www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
2004 Vista 268 Bow Roller https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=15632 |
Page 1 of 1 |
Author: | dnaugh5 [ Tue Jul 25, 2017 1:14 pm ] |
Post subject: | 2004 Vista 268 Bow Roller |
I looking for a 2004 Vista 268 Bow Roller. The dimensions are base length 22 1/4" X width 3 3/8" over-all length 27 3/4". Any help would be appreciated. |
Author: | Surface Interval [ Tue Jul 25, 2017 4:04 pm ] |
Post subject: | Re: 2004 Vista 268 Bow Roller |
From the http://www.fourwinns.com website and online parts catalog: http://parts.fwdealer.com/Catalog/Categ ... 8V-D02-Z00 Under the "P/L 268V DECK HDW," look for: 031-1046 ROLLER, ANCHOR CHUTE TentativelyAvailable 8/19/1999 - Present http://parts.fwdealer.com/Catalog/Categ ... rettyPhoto Check with your Four Winns dealer to order. Otherwise you could look for other aftermarket units at marine parts stores. Just curious.....what happened? I only ask because I bent mine a little this last weekend, but was able to straighten it with a couple hammers. |
Author: | Surface Interval [ Wed Oct 04, 2017 7:13 pm ] |
Post subject: | Re: 2004 Vista 268 Bow Roller |
My roller is 2 1/2" in diameter and 2 7/8" long. The bolt is 3/8" diameter and there is bushing that I think is 1/2" outside diameter. You might be able to use a roller that is 3" long and maybe 2 7/8" diameter, but you might want to measure for anything larger. The roller can be bought at the usual marine retailers or ebay starting at $5 to $15. Some may be $30+. Hope this helps. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |