| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Which 3M Sealant/Adhesive to re-set deck hardware? https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=15726 |
Page 1 of 1 |
| Author: | Cap'n Morgan [ Wed Sep 13, 2017 11:00 am ] |
| Post subject: | Re: Which 3M Sealant/Adhesive to re-set deck hardware? |
General rule of thumb: 4200 above the waterline 5200 below the waterline. Your experience may vary. |
|
| Author: | firecadet613 [ Wed Sep 13, 2017 11:31 am ] |
| Post subject: | Re: Which 3M Sealant/Adhesive to re-set deck hardware? |
My go to has always been LifeCalk. I have not had any issues with it curing in the tube and you can apply it to damp/wet surfaces. http://www.boatlife.com/life-calk-seala ... 2-8-fl-oz/ |
|
| Author: | chris268 [ Wed Sep 13, 2017 12:23 pm ] |
| Post subject: | Re: Which 3M Sealant/Adhesive to re-set deck hardware? |
I have used 3M 4200/5200 with the thought process, if you may ever want to remove it, use 4200. If it's something that is forever, 5200 will take care of it |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|