www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Thu Mar 28, 2024 12:19 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Mon Sep 18, 2017 9:24 am 
Offline
email admin your custom rank

Joined: Thu Jul 13, 2006 7:45 pm
Posts: 2866
Location: Indiana
YYZ-RC wrote:
My 268 had some jury-rigged aluminum edging installed around the perimeter of the swim platform; a simple L channel that was screwed into the platform and the backs of the screws were ground flush with the platform. It was all banged up with pieces missing so I removed it.

I'm now left with an ugly edge (the edging was hiding many docking mishaps, of course) and a bunch of screw holes. Is there an elegant solution to clean up the edge the swim platform?

I came across this which might work but not sure how well it would stay attached: https://www.fpmarine.com/U-shaped-motor ... x%20wh.htm

Thanks!


viewtopic.php?f=6&t=5511

I'll try and update with pics. When I bought my 268 the swim platform was all dinged up from the dry stack forklift. Very easy to do and it looked great when it was all said and done.

_________________
2007 358 T-5.7GXi IB
Previous Boats
'08 H240, '08 V318, '04 268, '04 225


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group