My 268 had some jury-rigged aluminum edging installed around the perimeter of the swim platform; a simple L channel that was screwed into the platform and the backs of the screws were ground flush with the platform. It was all banged up with pieces missing so I removed it.

I'm now left with an ugly edge (the edging was hiding many docking mishaps, of course) and a bunch of screw holes. Is there an elegant solution to clean up the edge the swim platform?

I came across this which might work but not sure how well it would stay attached: https://www.fpmarine.com/U-shaped-motor ... x%20wh.htm

Thanks!