| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Transducer on a Vista https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=15849 |
Page 1 of 1 |
| Author: | LUBA [ Tue Mar 06, 2018 8:30 am ] |
| Post subject: | Transducer on a Vista |
Where is the best place to mount a transducer on the transom with twin duo props? I got a smoking deal on a Raymarine Axiom 12 RV with the All-in-one RealVision 3D transducer. |
|
| Author: | alex8q4 [ Wed Mar 07, 2018 7:49 am ] |
| Post subject: | Re: Transducer on a Vista |
I have 2 transducers for my Lowrance mounted between the drives and it works great. I just followed instruction guide for locating the best spot. |
|
| Author: | jnizi [ Sat Mar 10, 2018 9:38 am ] |
| Post subject: | Re: Transducer on a Vista |
Our transducer is about 8' ahead of the transom just above the keel. Just make sure whomever installs it sets the proper angle to have the transducer look down. |
|
| Author: | LUBA [ Sun Mar 11, 2018 8:05 am ] |
| Post subject: | Re: Transducer on a Vista |
Is it better to mount it on a starboard or something? Or directly onthe transom? I see some are mounting to a board first. |
|
| Author: | alex8q4 [ Sun Mar 11, 2018 8:48 am ] |
| Post subject: | Re: Transducer on a Vista |
Starboard is a great idea as it gives you the ability to change transducers without poking more holes in your boat. Having said that, I don’t plan to have my boat for too long so I mounted them direct to the transom. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|