www.iFourWinns.com

This being a used boat. It may not be in the boat. Where is it normally stored. Or Can I order this somewhere? I'd like to use the v-berth to sleep.

_________________
2005 268 Vista

You mean the wood/formica insert that fits between the two benches in the V-berth ?

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista

Current Boat: 2004 Chaparral 235 ssi cuddy

If you mean the formica covered plywood board that fills in the V to make it into a berth, check under your mid cabin cushions, that's about the ONLY place on the boat you can store it

_________________
Brett DiMichele

Yes that. I scoured the boat. I guess I have it. Does that board need a stand to? dont

_________________
2005 268 Vista

No, it fits between the two benches. Nothing else needed.Except the cushions.

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista

Current Boat: 2004 Chaparral 235 ssi cuddy

Thanks. Guess I'm calling a four winns parts reseller/dealer.

_________________
2005 268 Vista

So you did not find it?, and you do not have it?

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista

Current Boat: 2004 Chaparral 235 ssi cuddy

So you did not find it?, and you do not have it?








So you found it and are good to go

_________________
2000 248 5.7L DP
'92, '94 SXI 750, '08 STX 15F, '12 Ultra LX 300
Videos

To tell them you have it? or.... To tell them you don't ?

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista

Current Boat: 2004 Chaparral 235 ssi cuddy

I thought the table dropped down and filled in the spot, or at least that is what we do.

_________________
2000 268 Vista "Reely Nauti"
http://www.facebook.com/#!/rivercruiser

Mine is on the starboard wall in the aft berth held by two brackets. I'm still confused did you find yours?

_________________

2008 Vista 278 Volvo Penta 8.1 Gi 375 hp
1999 Horizon 220 5.7 GSi

Sorry, sorry guys. Typo. I did NOT find it. So I called my local Four Winns dealer (rip-off artists). They want $140 shipped! For a piece of plywood or what ever. NOT!

Our table would not work. It's the wood model that is kinda square. It would not fit.

That price can't be right. I found it on the parts catalog. Looks like a cheap Laminated plywood. I may just make one from home depot parts for 5 bucks. I would just need to trace someone else's

_________________
2005 268 Vista

Yes, that is all it is, cheap plywood, covered with laminate. I would let you borrow mine to trace, where you located?? If you not by me, I am sure someone by you will help out.
If not, just take a big piece of cardboard to make a pattern. when done sand it well, couple thick coats of good paint, should be good to go.


May I also suggest you make a signature and/or fill out your profile so we all know a little about who and where you are.

_________________
2000 248 5.7L DP
'92, '94 SXI 750, '08 STX 15F, '12 Ultra LX 300
Videos

A sheet of void free birch and some pour on catylized urethane and you are golden! No veneer needed.

_________________
Brett DiMichele

Thanks for the advice once again. I'm going with the cardboard cut out and a nice piece of wood from the depot. Sorry for the lack of info. I belong to to many boards as it is and I try to limit the amount of personal info I divulge online these days. I can say I can say a few things. You all can call me Serg. I live in Fort Worth Texas. And I am in network security. Oh did I mention I love my boat?

_________________
2005 268 Vista